My shed/coop door is facing North but the wind blows right inside...was wanting something temporary

[Mother of Chaos]

How to attach it?

We zip-tied it!

If you have to fold it over to fit the door, that will be tricky, because you wouldn’t have grommets on the folded side.

But another option might be to attach it to the door and extend it beyond the door to the hinged side.

We just wrapped today one end of our run in a clear heavy-duty 8x20 tarp. We zip-tied it to the hardware cloth. It isn’t elegant, but it’s amazing how well it cut the 20 mph gusts of an incoming cold front.

I’ll take a pic tomorrow and post it here.

 

[hayley3]

I didn't get exctly what I wanted but this is what I did and it has really helped.
I bought some pvc trim at Home Depot and it's called PVC lattice (1/4 inch thick by 1-3/4 inch wide)..so it's just like trim around a window but not quite as wide. I screwed it to the wood around the door and then attached doubled sided tape to the PVC. The tape is sold in the Duck brand window insulation kit and I treated it just like a window, attaching the plastic to the sticky side. Worked great...So I can leave that up year round except for the lower part of the square...I will have to take that off in the summer. Because right now I have to duck under everytime I go into the coop.