Nurture Right 360 question

[PineHavenMama]

Which one is the older one? I have the one that has the smaller unit on top and the one I am still waiting for it to get here has the larger unit on top that goes from edge to edge with what looks like handles. I love the one I have I got 16/22 on my 1st hatch with it and on my 2nd hatch with it.
I am in lockdown so I can't look at

I am thoroughly confused about these incubators. I just inboxed them and the one I assumed was the older model because the openings on the fan cover were larger says it’s Version 3.0. The one with the round fan cover and smaller unit on top says Version 1.0 I’ll try to attach pictures. According to the instructions, the unit on the left is the newer one.

 

[smfarman]

I am thoroughly confused about these incubators. I just inboxed them and the one I assumed was the older model because the openings on the fan cover were larger says it’s Version 3.0. The one with the round fan cover and smaller unit on top says Version 1.0 I’ll try to attach pictures. According to the instructions, the unit on the left is the newer one. View attachment 2106611View attachment 2106612

I have the on right and the one left is the one I am waiting on, shipment was delayed. The Nurture Right 360 is a great incubator, Temp is steady and consistent through out incubation, I just needed to monitor humidity I live in Florida so himidity was my concern, but wasn't a problem with this incubator. Good luck with your hatches

 

[PineHavenMama]

I have the on right and the one left is the one I am waiting on, shipment was delayed. The Nurture Right 360 is a great incubator, Temp is steady and consistent through out incubation, I just needed to monitor humidity I live in Florida so himidity was my concern, but wasn't a problem with this incubator. Good luck with your hatches

Thank you. It’s great to read about other’s experiences. I have two of the same model now. I need to read through everything and make sure they’re working before my eggs arrive. Now I’m thinking of switching from a heat lamp to a heat plate after all my reading.

 

[careeka22]

That’s very encouraging to hear. I’m wondering which model you have? Do you have the older or newer fan cover?

I have the 3.0 with the square fan.

 

[Knighstar679]

I have one of each of these. One newer one (smaller top unit) and one older one (larger top unit). Both work great. You have the fan covers built it it seems so you won't have to worry about heads getting inside or humidity killing the electronics like i did when I did my first hatch. I had to contact the company for the guard and the electronic protection for the board inside and install both. Yours is newer than my first one was.

Great little incubator. Most people who put on a negative review from what I had been reading had ones without the fan guard or no electronic protection from the first models. I just put a little bit of water in it once a day and the humidity stays stable enough for a dry hatch method. But if you want more humidity you can certainly keep watch on it and keep it higher.