I've been lurking for a while, but finally decided to join yesterday. Anyway...I'd like to share the rain catchment waterer I made for my coop.
Some issues- I'll probably end up painting the bucket black to keep algae growth down, and the leak that's pointed out in the video.
I don't really explain the watering end of the system in the video, but it's a length of pre-made watering pipe (the saddles were already glued on) that I bought at a poultry supply place cut to length. The nipple insert into the saddle, then twist and clip. They're very easily changed out if you get a leaky one. We have 5 nipples for our flock of 12 (which will soon be culled to 8 once they're a little larger). The outlet for the bucket is in the center so that it can be screwed on and off (the overflow isn't cemented so it lifts off) for cleaning.
I made the feeder out of 4 inch sewer pipe (it's thinner and easier to work with). I used a 2.5 inch hole saw to cut the holes, then sanded down the rough edges. I assembled it with screws so that it can be removed and cleaned easily. It's wedged in a cinder block to keep it secure.
Let me know what you think. Comments and criticism are welcome.
Some issues- I'll probably end up painting the bucket black to keep algae growth down, and the leak that's pointed out in the video.
I don't really explain the watering end of the system in the video, but it's a length of pre-made watering pipe (the saddles were already glued on) that I bought at a poultry supply place cut to length. The nipple insert into the saddle, then twist and clip. They're very easily changed out if you get a leaky one. We have 5 nipples for our flock of 12 (which will soon be culled to 8 once they're a little larger). The outlet for the bucket is in the center so that it can be screwed on and off (the overflow isn't cemented so it lifts off) for cleaning.
I made the feeder out of 4 inch sewer pipe (it's thinner and easier to work with). I used a 2.5 inch hole saw to cut the holes, then sanded down the rough edges. I assembled it with screws so that it can be removed and cleaned easily. It's wedged in a cinder block to keep it secure.
Let me know what you think. Comments and criticism are welcome.