- Thread starter
- #71
veedabowlu
In the Brooder
@Mouthpear The motor I have is 12V... do I get the 12V relay board OR the 5v relay board... little confused here.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
@Mouthpear The motor I have is 12V... do I get the 12V relay board OR the 5v relay board... little confused here.
Well @Mouthpear since we are talking the three outputs, 6 relays... might as well buy the 8 relay board (high and low switching) OR NOT high/low switching... advise me...
If you see something OR know of a quality one from Amazon...by all means point me to it with a link... plan to use raspberry Pi 3B+ (for your wiring diagram) and this splitter for the POE/ethernet
@Mouthpear do you have a better suggestion for Active 12V PoE Splitter Power Over Ethernet Adapter as its limited to 10/100Mbps and 3 cameras might slow that down quickly... my network is 300Mbps...
Noooo. MY apologies! I sent you the wrong link/product. They are not the same. Good thing you asked. Otherwise I may have not caught my error. The one I sent you is an Injector and the one you found/sent you is just a splitter. The splitter one is the one you will most likely need.@Mouthpear understood on the splitter...is this one the same thing? (the one you pointed to is 20+ days out for delivery)
The diagrams/style/colors look great...other than the pin numbers on the Rpi, and you not hooking it up for me, I couldn't ask for anything else, lol... but I guess the GPIO assigned pin numbers will come with your complimentary supplied code?
All the tech in the world won't help if they don't have enough space...
My understanding is Pis draw a lot of power
We were pondering a solenoid opened door over here.