ROLL-X WON'T HEAT

[Ringtailtwister]

I have a older Roll-x incubator that has been getting a good hatch rate. The fan motor started making a loud noise when it first starts like a bad bearing. I replaced the fan and now the incubator will not heat. Can any one help with this problem? I don't know what too do got eggs running out my ears.

 

[GAQuail]

My first thought is the wire for heating got disconnected while installing the new fan. Did you find a fan similar to the old fan or is it one of the large computer type fans that the newer roll-X use?

 

[Ringtailtwister]

It is a fan like computers and other things use Sunon 102sp. I think I've found the problem one of the small wires was broken. So I going to rewire it tonight. I've got about 10 dozen BLRW eggs I need to put in it a.s.a.p. I'll post again if this fixes it or not.

 

[Ringtailtwister]

I FOUND THE PROBLEM. ONE OF THE SMALL WIRES HAD BROKEN WHEN I REPLACED THE FAN. I'VE FIXED IT AND I'M GOING TO PUT EGGS IN IT TODAY.

 

[GAQuail]

Good news!