- Thread starter
- #11
Thanks. I can see either A or B working for me.Option 1:
For tarps that have no eyes, you can use tarp clamps.
Option B:
Sandwich the tarp with to strips of wood and screw them together.
Option III:
Get a Circular saw and cut down the length of PVC pipe. Like the two big pipes(just an example.) Clamp pvc to table stack boards til the Shoe can sit without teetering. Screw down one more board offset as a guild. Cut the slit just big enough for the tarp to fit. If you get lucky you can roll the tarp over the smaller pipe and push it all the way in, keeping the stitched over lapped edge coming out (like towel end) and it might just hold tight enough. If it is too tight you can slit the inner pipe so that is can compress. Too loose, you can slide tarp all the way in and screw the two pipes together at the ends and one in the middle.
View attachment 3516677