- May 19, 2008
- 148
- 2
- 111
Alrighty, I am following up my PVC feeder with my Stove pipe feeder.
I used 6" stove pipe that comes in 24 inch sections. I bought a feed pan from the co-op for the bottom.
I used "L" brackets and 1/4 or 3/8" sheet metal screws.
this is an over view shot
This next picture shows how I put the "L"brackets on. What i did was put the stove pipe on the pan and trace with a marker. screwed the "L"'s to the pan then screw the L's to the pipe. The "L" 's face in bc there wasn't enough room for them to go the other way.
Here is a view of the inside.
I used 6" stove pipe that comes in 24 inch sections. I bought a feed pan from the co-op for the bottom.
I used "L" brackets and 1/4 or 3/8" sheet metal screws.
this is an over view shot
This next picture shows how I put the "L"brackets on. What i did was put the stove pipe on the pan and trace with a marker. screwed the "L"'s to the pan then screw the L's to the pipe. The "L" 's face in bc there wasn't enough room for them to go the other way.
Here is a view of the inside.
