The Old Folks Home

It's been set on 37.5 the entire time. What temp should it be at?
You need to verify the temperature with something like a brinsea spot check.

If hatches regularly go long, then the temp is usually too low. Too low is worse than too high. Try setting to 37.72 for the next hatch
 
You need to verify the temperature with something like a brinsea spot check.

If hatches regularly go long, then the temp is usually too low. Too low is worse than too high. Try setting to 37.72 for the next hatch
Eggs from my BA/Silkie crosses start hatching on day 20... and I finally have one egg pipping.. wrong end, but hey.. something is happening!! I have a two way digital thermometer that reports back to the main station, it's saying 95 degrees on the nose.
 
Eggs from my BA/Silkie crosses start hatching on day 20... and I finally have one egg pipping.. wrong end, but hey.. something is happening!! I have a two way digital thermometer that reports back to the main station, it's saying 95 degrees on the nose.
Do you mean 99.5F?

95F is the zone of death for incubating chicken eggs. Since they are hatching well, my guess is that the thermometer is way off.

Brinsea spot check is only for incubating and is very accurate. Be sure to purchase from Brinses since amazon sells knockoffs
 
Do you mean 99.5F?

95F is the zone of death for incubating chicken eggs. Since they are hatching well, my guess is that the thermometer is way off.

Brinsea spot check is only for incubating and is very accurate. Be sure to purchase from Brinses since amazon sells knockoffs
Ok, thermometer is up to 98 degrees F. It's taking a while for it to register, but yes, next hatch I'm going to raise the temp on the incubator and spot check with my digital.

Edit: The thermometer is registering 99 degrees F and 70% humidity. Takes a while for it to be correct since it has to warm up itself.
 
Last edited:

New posts New threads Active threads

Back
Top Bottom