Vinyl panels

[RNPAULIE69]

We had a pretty bad storm a few weeks back with horrific winds. I had bought clear shower curtains and stapled them to the pen just so everything in the pen wouldnt get soaked. The wind was so bad iy ripped them right off the pen panels. Thinking ahead to the lovely noreasters we get i did a little research and bought marine grade vinyl and gaffers tape. You trim the vinyl to size, make a frame with the tape then use the steel buttons made for RV window attachment. The back part has a screw that gets screwed into place. Pretty pleased with the first panel. I am not going to do the whole pen, just the front and two sides where most of our winds come from. Best thing is they just snap on and off

 

[N F C]

Good idea, thanks for sharing (the picture helps)!

 

[aart]

Let us know how it works out.
You could always add more snaps.
Is the tape a self adhesive?
Female side go on vinyl with a special tool?

 

[RNPAULIE69]

Let us know how it works out.
You could always add more snaps.
Is the tape a self adhesive?
Female side go on vinyl with a special tool?

I think 6 snaps per panel will work. The tape is just like duct tape but doesn't leave a residue when removed and it's matte finish not shiny like duct. It came in an inch width roll, I put the vinyl down on half then folded other half over. Yes, there is a tool to bang the snaps together after you make a hole

 

[DoeAndGander]

Hello! I’m wondering how well this worked and where you’re located. Thanks!

 

[aart]

Yo! @RNPAULIE69 you still getting notices?