Quote:
Let me read this a few times and I will hopefully get back with an answer.
You say there is 2.0 on the ground. What 2 points are you connecting the meter to? Disconnect the hot wire and check the ground for voltage. Has this changed with more / less rain? How old is the fenceer is there a chance it is old and may just be at the end of it's useable life?
here lets try again.
I have a fence tester, small ground rod on it and you touch the pointed end of the digital box to the wire. so I pushed the little rod into the wet ground, touch the other end to the ground wire. it says 2.0. when I touch the tester to the hotwire coming from the box it says 4.0. the charger is a power wizard 1000. it has a 1 joule output. I tested it after I cleared the stickers off the ground wire, was mad it had shocked me and I didnt test it before.
we did have some rewiring go on in the barn recently. trying to wire up the chicken coop electrical we found the previous stoner had installed the fuse box and all the power for my barn and coop with absolutely no ground anywhere. it was all direct and would blow the breakers when you turned on the lights in the coop. it was wired with tape and all sorts of silly things. so the box was redone and grounded and new outlets wired in with grounds.
anyway, I know the charger ground wire shocked me, not sure why, I dont understand the pw1000 manual and what it says there. it says no more than 200 should show on the tester... 200 what???
Let me read this a few times and I will hopefully get back with an answer.
You say there is 2.0 on the ground. What 2 points are you connecting the meter to? Disconnect the hot wire and check the ground for voltage. Has this changed with more / less rain? How old is the fenceer is there a chance it is old and may just be at the end of it's useable life?
here lets try again.
I have a fence tester, small ground rod on it and you touch the pointed end of the digital box to the wire. so I pushed the little rod into the wet ground, touch the other end to the ground wire. it says 2.0. when I touch the tester to the hotwire coming from the box it says 4.0. the charger is a power wizard 1000. it has a 1 joule output. I tested it after I cleared the stickers off the ground wire, was mad it had shocked me and I didnt test it before.
we did have some rewiring go on in the barn recently. trying to wire up the chicken coop electrical we found the previous stoner had installed the fuse box and all the power for my barn and coop with absolutely no ground anywhere. it was all direct and would blow the breakers when you turned on the lights in the coop. it was wired with tape and all sorts of silly things. so the box was redone and grounded and new outlets wired in with grounds.
anyway, I know the charger ground wire shocked me, not sure why, I dont understand the pw1000 manual and what it says there. it says no more than 200 should show on the tester... 200 what???