Welsh Harlequin Duck Egg.

Lucia_S

Hatching
Sep 26, 2021
9
5
8
Hi, I have a duck egg that was due to hatch on the 30th of September, it is now the 2nd October and it is still not showing any signs of piping. When I tap on it I get no reaction. I might take some photos tonight but do you think i should leave it for a bit longer or remove it from the incubator? Thanks!
 
Hi!

Can you describe your incubation technique? Like temperature, humidity, still air or forced air, date you set the eggs, etc?

Also if you could get a picture that would be a big help :)
 
It's a still air incubator that's been set at 38 degrees celius and humidity has been set between 40 and 50% up until lockdown, when I have then managed to get it up to 70% however it is somewhat faulty and fickle and it is hard to keep it above 58%. The eggs were set on the 2nd of September and are now on day 30, they looked like they were doing good on day 25 so I don't know where I have gone wrong. Will take pics when I get home, thanks for the reply :)
 
It's a still air incubator that's been set at 38 degrees celius and humidity has been set between 40 and 50% up until lockdown, when I have then managed to get it up to 70% however it is somewhat faulty and fickle and it is hard to keep it above 58%. The eggs were set on the 2nd of September and are now on day 30, they looked like they were doing good on day 25 so I don't know where I have gone wrong. Will take pics when I get home, thanks for the reply :)
 

Attachments

  • IMG_20211002_193218.jpg
    IMG_20211002_193218.jpg
    214.3 KB · Views: 9
  • IMG_20211002_193233.jpg
    IMG_20211002_193233.jpg
    165.8 KB · Views: 7
  • IMG_20211002_193258.jpg
    IMG_20211002_193258.jpg
    169.2 KB · Views: 7
  • IMG_20211002_193320.jpg
    IMG_20211002_193320.jpg
    190.6 KB · Views: 5
  • IMG_20211002_193332.jpg
    IMG_20211002_193332.jpg
    168.5 KB · Views: 7
The first pic is pointy end down and the last two are of it pointy end up. I also included a pic of it's air sac which has been like that since the start of incubation, pretty sure it's from being thrown around in the post.
 

New posts New threads Active threads

Back
Top Bottom