WE HAVE WATER!!!!!
I am going to tell you all exactly how easy it was to get this all set up (minus wandering stores for 2 hours trying to figure out the last few parts I needed) because it seriously took maybe 20 minutes to set up (and most of that was unrolling the tubing).
Supplies Needed:
Step 2: Insert one end of the tubing into the unthreaded end of one of the 3/4" to 1/2" Adapters. Use one of the Straw Staples to hold this end of the tubing in place (near the spigot).
Step 3: Unroll the tubing to where you need it to end. Straighten it out as needed. (I originally had to walk backwards to my garden while unrolling the tubing, so I had to go back and pick it up near the beginning and pull it tighter. Wear gloves if it is hot and sunny because this tubing gets hot quickly).
Step 4: Attach the adapted end of the tubing to the spigot.
Step 5: Use the Straw Staples to secure the tubing to the ground.
Step 6: Insert the unadapted end of the tubing into the remaining 3/4" to 1/2" Adapter.
Step 7: Attach the Threaded Hose Adapter to this end.
Step 8: Attach a hose or sprinkler to the Threaded Hose Adapter.
Step 9: Test that water does indeed travel all the way to the end with no leaks.
Step 10: Water the dry cardboard with grass piled on top of it out of SHEER JOY that the whole process was so simple and quick!
Step 11 (OPTIONAL): Bury the tubing so you don't trip on it or run it over with the lawn mower (I haven't done this, yet, but I am going to because that tubing gets scaldingly hot surprisingly quickly).
Supplies Needed:
- 500' of Drip Irrigation Tubing (Ace Hardware has the cheapest price, but Menard's was the only place nearby that had it in stock)
- 1- Backflow Preventer
- 2- 3/4" to 1/2" Adapters
- 1- Threaded Hose Adapter (to make the female on the 3/4" to 1/2" adapter into a male end)
- 25 pack of Straw Staples
- A sharp knife to cut the tubing
Step 2: Insert one end of the tubing into the unthreaded end of one of the 3/4" to 1/2" Adapters. Use one of the Straw Staples to hold this end of the tubing in place (near the spigot).
Step 3: Unroll the tubing to where you need it to end. Straighten it out as needed. (I originally had to walk backwards to my garden while unrolling the tubing, so I had to go back and pick it up near the beginning and pull it tighter. Wear gloves if it is hot and sunny because this tubing gets hot quickly).
Step 4: Attach the adapted end of the tubing to the spigot.
Step 5: Use the Straw Staples to secure the tubing to the ground.
Step 6: Insert the unadapted end of the tubing into the remaining 3/4" to 1/2" Adapter.
Step 7: Attach the Threaded Hose Adapter to this end.
Step 8: Attach a hose or sprinkler to the Threaded Hose Adapter.
Step 9: Test that water does indeed travel all the way to the end with no leaks.
Step 10: Water the dry cardboard with grass piled on top of it out of SHEER JOY that the whole process was so simple and quick!
Step 11 (OPTIONAL): Bury the tubing so you don't trip on it or run it over with the lawn mower (I haven't done this, yet, but I am going to because that tubing gets scaldingly hot surprisingly quickly).