LLranch
Chirping
- Jan 15, 2017
- 99
- 19
- 66
That probe goes to my thermometer hygrometer it only reads temperature and humidity and does not control anything. On the thermostat the wafer disc itself expands and contracts to open and close a switch that runs the lights no probe is necessary with it. I have the wafer thermostat in 1 incubator and a digital and the other incubator both work great. If you are old school and would be more comfortable turning the knob to tune in an old AM radio station you would be happy with the wafer thermostat. If you are more modern and would rather push buttons you would be happier with a digital thermostat. Here is a link to the digital thermostat I use and a picture of its probe connected directly to the fan.Inkbird Dual Stage Digital Temperature Controller Fahrenheit Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect https://www.amazon.com/dp/B0152LYY0I/ref=cm_sw_r_cp_apa_LR4dzb1ZJDCPZ
I almost forgot the inside floor of the incubator is 18 inches by 11 inches it is 10 inches top to bottom on the inside
I almost forgot the inside floor of the incubator is 18 inches by 11 inches it is 10 inches top to bottom on the inside
Last edited: