Where To Check Temp in Brinsea Octagon 20 Eco

CedarAcres

Sunny Side Up
6 Years
Mar 18, 2013
910
49
138
Connecticut
My Coop
My Coop
Hi guys!

I'm getting ready to try out our incubator (brinsea octagon 20 eco) for the first time and I wanted to make sure the temp is correct. Where should I check the temperature in this particular incubator? The thermometer that comes with it is mounted at the top. Is this the one I should go by or should I place one at egg level? Thanks :)
 
I would trust the Brinsea one you have in there. They design the incubators so that you get a correct reading from where they have placed the thermometer. All to do with air flow etc. I have the octagon 20 advance and trust it completely never had a bad hatch with it. Good luck with your incubation :fl
 
Last edited:
I've done a few successful hatches in my Brinsea and I left the thermometer where they placed it. It is fine where it is
smile.png
Good luck with your hatch!
 
Thanks! I ended up checking it with one of my husbands fancy thermometers from his job.. the built in one was spot on with temperature accuracy
smile.png
 

New posts New threads Active threads

Back
Top Bottom