I'm having similiar issues. I have several pans of water (big incubator) and can't get it above 20%. I added the first pans 2 days ago and they are dry already. It is made to hook up toa water line and it adds it itself but we don't have it set up yet. We need to work on that to make it easyier. I guess I will just have to add another pan and just add water often for now.I am having humidity issues. I am not stressing about it, but I am just trying to get a handle on it. I thought I would incubate dry until lockdown, as the humidity in the house is always 45-50%. The first day though, the bator was at like 16%, so I added a bit of water. That brought it up into the 30s... perfect. The water ran out in one day, and it went back down to 20, so I added more water than the first time so it wouldn't run out so fast. That brought the humidity up to almost 70%. *sigh* I didn't think it would do that, since it is the same amount of surface area of water. (I am adding to a very shallow container, not into the bottom of the incubator.) I did this so it would be much easier to take water out if needed. Anyway, I took half the water out, and now it is down in the 40s again. Am I going to need to add just a bit of water every day, or is there an easier way?