a bit of thermostat help

[marinica]

i buyed a chinese thermostat.
specs :
Specifications:
Working voltage: 90~250V±10%
Rated current: 10A
Power consumption: ≤3W
Measurement range: -50~110 Celsius degree
Measurement precision: 0.1 Celsius degree
Measurement error: ±0.3 Celsius degree
Control precision: 0.1 Celsius degree
Working temperature:‐20~70 Celsius degree
Temperature sensor: NTC 25 Celsius degree=10K B3435


my problem is that the manual seems to be google translated, and i dont understand what to do to set it up. (is on C, and i will build an incubator with a computer fan)

http://i.imgur.com/sohQMsM.jpg

any help from people which have the same model ?
thanks !

 

[Jessshan8]

i buyed a chinese thermostat.
specs :
Specifications:
Working voltage: 90~250V±10%
Rated current: 10A
Power consumption: ≤3W
Measurement range: -50~110 Celsius degree
Measurement precision: 0.1 Celsius degree
Measurement error: ±0.3 Celsius degree
Control precision: 0.1 Celsius degree
Working temperature:‐20~70 Celsius degree
Temperature sensor: NTC 25 Celsius degree=10K B3435


my problem is that the manual seems to be google translated, and i dont understand what to do to set it up. (is on C, and i will build an incubator with a computer fan)

http://i.imgur.com/sohQMsM.jpg

any help from people which have the same model ?
thanks !

Here Ya go hope it helps.

 

[marinica]

ah, that i know, thanks. sorry, i should have been more clear.
first i dint know how to enter "advanced" setup mode. in documentation say that i need to press set for 3 seconds, but actually was 5+, so i struggle a bit until i manage to get there. that was my main issues, and now i know what to do.

to double check values on C (most articles i've read use F).
i set the temperature when the relay turn off to 37.7 C (~100f) so at this temperature, thermostat will turn off the light bulbs. (but temperature will continue to raise ? 37.7 is ok to set for turning off ?)
next, i have to set a value on which the thermostat will turn on again the bulbs. default is a difference of 2C so that means the bulbs will start at 35.7C. i presume is a bit to low. 1C it will be enough ?
thanks.