We built a little coop in a covered area right behind our house, and used plywood for the roof and sides. We're both total neophytes when it comes to construction. After a couple of months we began to notice some slight bowing of the plywood in the areas where it isn't screwed down to the frame (doors, windows, raise-able roof), and now that we've gotten our first rain (and discovered that "covered" is nowhere near "watertight"), we've got some serious warping going on. Does anyone have any tips/tricks/advice on how to fix the warped boards?
The frame
The access doors
Outside of coop without access doors installed
The frame
The access doors
Outside of coop without access doors installed
