Auto chicken Door Wiring Help Needed

A single relay that is able to do it the way the diagram shows is called a double pole double throw (DPDT)
http://www.amazon.com/Dayton-1EJH2-..._2?s=industrial&ie=UTF8&qid=1316889920&sr=1-2

If you want motor in the morning and manual at night....

+ to door switch
door switch to 87
30 to motor
other side or motor to -
(switch polarity if motor runs backward from what you want)

disregard 87a altogether attach nothing.
 
hi Yellwirenut

ok many thanks , i will update once iv decided which way to go,

thanks again for your help , you've been great
smile.png


Diz
 
it was fun...let us know how thigns work out.
Post pics.

I actually had not thought it all the way threw before. Now that I have it may become a project for me also.

solar power charger for battery with timers and low temp auto close WOO HOO!

winter project....
 
update:

ok so i got a 5v DPDT relay, its slightly different numbered pins but im sure its the same.

heres the circuit
HFD2_Circuit.gif


iv done a test wire up

upon connecting power to both circuit, the motor runs continuous with the limit switch's having no effect when pressed.

hmmm....
 
what happens when you unplug/unwire the limit switch? Does it stop then?

you say its a 5 volt relay?
you need a 12 volt.

old relay new relay
85 1
86 16

30 4
87a 6
87 8
 
Last edited:
hi

ok after a fiddle we have the motor going one way , and one limit switch cuts the power when pressed.

cant seem to get the other side working

heres what i have ,

1...... 5v + (will be timer switch)
16.... 5v - (will be timer switch)

4......motor +
6......5v -
8......limit switch 5v +

13.....motor -
11.....limit switch... 5v +
9.......5v -

ps its a 5v relay, motor and batterys
 
Last edited:
the motor will turn the opposite direction when power is cut to 1 and 16
timer clicks on motor turns up until limit switch clicks
12 hrs later
timer clicks off and motor turns down until limit clicks
 
so your saying the wiring is correct ?

if so ill install it and report back
smile.png


thanks

Quote:
 

New posts New threads Active threads

Back
Top Bottom