Thank you. It is layers of bits of organza which were sandwiched between cold water soluble fabric, the top one with the design drawn on with a stabilo or similar. Then you free machine all the lines of the design. Then soak the whole thing to dissolve the soluble fabric. Then you cut away some layers of the organza to reveal the colours underneath. Finally you get out your soldering iron and 'cut' out the spaces and around the edge. You also make the little holes.
I shall probably attach it to an artists canvas and hang it on the wall. It's about 8" by 8".
I shall probably attach it to an artists canvas and hang it on the wall. It's about 8" by 8".