- Thread starter
- #9,611
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
How should I go about making the thermostat more accurate? I think that is what I need
Hapiness! Congrats....and come on blue surprise!
that could be part of it ...also there is some ajustment and "play" you need to do with how close you set it to the light bulb....also you need to check the temp even if the light goes off there is still a radiant heat the glass will continue to set off ...........the way I set mine up I can slightly bend back or forward to the bulb for slight deigree ajustments without having to ajust the thermastat switch which is harder to ajust within small digree or half digree.... anyways Please share two pictures of the water heater thermostat you are using..I need the front and back shot of it.........`..here is how the basic disgn works.. inside where the metal hole are drilled holes in front of a super thin thempature sensative metal disk..this disk will warp and move when it warms up which causes the therma stat to ajust "somehow" I dont know the specifics on how enough to explain...... but the metal plats that are on the outside of the thermastata have drilled holes... what you do to ajust it is get a drill use a bigger drill bit then the hole and widen the metal plate hole........ this allows MORE air flow to flow over the sensative metal disk inside so it warps and ajusts temp..........but you need to be careful on the 4/3 holes you drill out because some might not be air holes but riviet holes that hold the disk in place......How should I go about making the thermostat more accurate? I think that is what I need
Amberjem those appear to be wheaten Marans x buff brahma. The males should feather in darker colored.
The blue eggs will be ice cream bars, Wheaten marans x cream legbar F1 olive eggers, or blue Marans x cream legbar F1 olive eggers. Gonna be gangsta