I'm sorry I can't answer your last two questions because I have no experience with detached air cells.I’ve got a bunch of shipped eggs in the incubator and participating on the hatch a long so we are at day 6 today.
My worst eggs had pretty damaged air cells. Some large saddles, one I couldn’t even find, and others that were just gel sort of rolling around but not totally displaced.
I waited until day 3.5 to turn these. Last night I candled and weighed the entire incubator. There’s so dang much information on all sides I just picked the average time I found from 1 to 7 days of no turning.
Anyway all the eggs have great development. A lot of those air cells are solid now. A couple are notttttt so much. There’s still a few jelly and a few that can move.
I’m going to not touch those bad cells again as long as I can wait.
All of this background for a few little questions....
Am I looking for the same weight loss in bad air cell eggs as good? I’ve got a few eggs that are my favorites and I’m weighing and basing humidity off of them for now, not hoping much on these damaged eggs. But I could put the bad air cells in another incubator if they have drastically different weight loss needs.
What’s the typical day range you will lose an embryo in a damaged air cell egg? Does it get more common to lose it as it ages or less?
I’ve read a few things that say if the embryo makes it to day 15, the air loss has essentially locked in the air cell. Is this true?
Thanks!!!!
However, I would think that any egg needs to lose the same amount of weight. For chicken eggs, that's about 0.65% per day. I don't think it would matter a lot what the condition of the air cell is.
A point on turning is that the first 7 days are the most critical time for frequent turning to produce healthy embryos. IMO turning is more important than concern about the air cells. If you don't turn the first 7 days, you are going to degrade hatchability regardless of air cell condition. Because really, the air cell location only matters as hatching nears anyway, does it not?