British, too. They have been doing this a lot longer than we have, and make top of the line incubators. Like I said, Brinsea or RCOM for plastic
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
British, too. They have been doing this a lot longer than we have, and make top of the line incubators. Like I said, Brinsea or RCOM for plastic
so can i safely hook it up and find out if any thing it wont be enough oh and the box thats in the pic is the fan kit heater its all one piece that you put in i took out the original heater that came with the still air unit..I could not find any technical information about the LG 7300. The Chinese (HHD manufactured) incubator uses a 12 VDC fan and 110 VAC to the 80 watt heater. The controller can briefly handle more than 80 watts, since the PTC heater draws higher wattage when it is cold. I found that the incubator has a lot of heat loss through the plastic and needs at least 50 watts of heating to maintain 100 'F in a 65'F room, even when it is in the Styrofoam bottom. If the LG heater is less than 80 watts, it may not be able to maintain incubation temperature.
so can i safely hook it up and find out if any thing it wont be enough oh and the box thats in the pic is the fan kit heater its all one piece that you put in i took out the original heater that came with the still air unit..