Long story short, Take a swimming pool noodle, cut it into a 10" length. Cut a piece of PVC that will slide into the middle of the noodle at 1' long. I glue the PVC into the noodle and glue PVC caps on the end of the PVC. I put an eye hook in one of the caps before gluing it on. Tie about a 3' piece of twine onto the eye hook, put a nice sized circle hook on the other end, some reflective tape on the end oppisite the eye hook. Bait the hook and throw it in. We fish about 25 to 100 of these a night, and they only take about 5 minutes to put together once you get a system. Go swim for about an hour then go check your jugs. The fun kicks in when you chase a jug around while the fish is trying to outrun the boat motor. It isn't legal in all states so check before you start, and the jugs cost less than a dollar each when you make your own.