grannys gone and done it

Status
Not open for further replies.
Quote: you wont have time for pictures billy
lau.gif
 
well what did you do that for !!  I dont know exact size . I will run out there and check and see if I might have any thing. If I build a 2x2 frame I will have to but the hardware cloth as all I have is chicken wire.    and how will a folded piece of paper tell me what 45d is ? I will be right back.


Fold the corner over til the edges are flush. That angle is 45*
 
Granny, the paper does not have to be square. Just the edges must be equal after the fold.

Something else you can do granny, is to take a sheet of paper measure 6 inches from a corner then measure 6 inches from the same corner going the other way draw a straight line between those two points that line will be a 45
 
Last edited:
there are places for 4 shelves I only noticed the 2 because thats what it came with.. one is wire it is 18x12.. the bottom is half glass removable shelf and half molded fridge. If I used anything else it would be uneven. If I go up a spot they Might be too close . cant tell as I only have the one. BUT ! theres always a but, the glass shelf has about 5in. clerance from the end of it to the door . Is that enough circulation ? I can also pull the shelf forward an inch or so to distribute the heat, water a little better.
 
Status
Not open for further replies.

New posts New threads Active threads

Back
Top Bottom