Hatching troubles, Help

[6sablehens]

Did you see the photo I attached of a duckling shrink wrapped? If so does it look anything like yours?
Would you be able to take a photo?

 

[JWW]

I agree. I had to be careful with my other two. I have been hopeful that I would not have to help these. If the water test of the membrane is ok, is the safety pin size hole ok?
I have not had to make a breathing hole so far.

 

[JWW]

Did you see the photo I attached of a duckling shrink wrapped? If so does it look anything like yours?
Would you be able to take a photo?

I can't see that much of the membrane. I turned the humidity up on the incubator and the sides are fogged up so I can't take a picture yet.

 

[6sablehens]

Just be careful the humidity’s not too high... are there any other eggs in the bator?

 

[6sablehens]

A safety pin would be all I would do at first... don’t want to interfere too much until 100% sure what’s wrong and that it needs help.

 

[JWW]

Just be careful the humidity’s not too high... are there any other eggs in the bator?

I have it on 73. I have the other egg that is coming out the small end (like its sibilings).
I did not realize it had made a pip until a little bit ago because it was on the wrong end as well as on the bottom of the egg.

 

[6sablehens]

Hopefully we can get a few more opinions... I’ve only hatched a few times, but I have successfully helped a duckling hatch, although I don’t recommend unless there is no other option. Curious to see what others think about this.

 

[6sablehens]

My duckling grew into a strong drake....

 

[JWW]

Hopefully we can get a few more opinions... I’ve only hatched a few times, but I have successfully helped a duckling hatch, although I don’t recommend unless there is no other option. Curious to see what others think about this.

Is my humidity ok?

 

[6sablehens]

70 - 75% for lockdown. 73% seems fine.