HELP! Does anyone know the answer to this?????

Engteacher

Poultry, Poetry, and Prose
13 Years
Sep 1, 2009
394
7
214
Hastings, MN
I bought this from Randal Burke to keep the water from freezing in winter. Unfortunately, it doesn't say anywhere what the wattage or amperage is on the website, the box, or the heater itself. I don't want to blow the fuse in the coop. Can anyone tell me where I could find this information out?

http://www.randallburkey.com/Electric-Heater-Base/productinfo/10019/

40359_10019.gif


Help?
 
Found this, it might help.

Thermostat keeps water at 50 to 55 degrees. Operates only when temperatures are below 34 and operates at 125 watts.

Chris
 
The conversion of watts to amps is governed by the equation: amps = watts/volts

Assuming we are talking about a 110/120 ac volt circuit; let's assume that the heater is 250 watts. That comes to about 2 amps. Your electrical will be rated for at least 15 amps (at a minimum). Assuming there is not high resistants in your electrical pathway(s) do to long distances, poor connections, etc... you should have minimal concerns...

What other loads are on that same circuit breaker?
 
I have had two of these heaters on the same 15 amp circuit along with a timer/20 w florescent light fixture for 10 years and have never tripped the breaker so I suspect you'll do just fine.
 

New posts New threads Active threads

Back
Top Bottom