HELP! Omlet automatic coop door problem

Sg4

Songster
Aug 7, 2017
67
104
127
I purchased the automatic door from omlet and attached to my existing wooden coop. I've had it for about a year now. I get the occasional "wiring fault" error but it is rare and I have figured out how to fix that little "bug" in the system.
About 3 days ago my auto door stopped closing at night. It is set on a timer. The error said "door fault". So I had to close manually, however the door will just continue to open and close over and over again until I hit the button a second time to make it stop in the closed position.
I was able to close it manually a couple nights and it would reopen on its own in the morning. But today I had to open it manually as well.
I did a factory reset, made no difference. My next step is to disconnect the wire and re connect, but aside from that, I'm clueless. Has anyone had this issue? Is my door just busted permanently?
I did test the crash bar by blocking the entryway with an object, and the sensor successfully detected the object and reopened. But it will just keep opening and closing by itself.
 

Sg4

Songster
Aug 7, 2017
67
104
127
How did you fix the wiring fault issue. I am getting that on both my omlet auto doors. Sorry i can't help with your question. I am still stuck at the wiring fault stage
To fix the wire fault, I lock and unlock the screen. I have read that it is mostly common when you keep the screen locked all the time. I keep mine unlocked but still get the error sometimes. So try to lock it, wait a minute, then unlock again, and do a manual open/close. Hopefully that will trick it for you
 

Louwin

Songster
Aug 29, 2020
90
735
147
Melbourne, Australia
To fix the wire fault, I lock and unlock the screen. I have read that it is mostly common when you keep the screen locked all the time. I keep mine unlocked but still get the error sometimes. So try to lock it, wait a minute, then unlock again, and do a manual open/close. Hopefully that will trick it for you
Thanks so much. I will give that a try. I never lock my screen but the fault appears to just come up randomly.
 

Frenchkissed

Chirping
Feb 25, 2021
70
61
53
I have a question please. I noticed last night on my new installed automatic coop door opener that upon closing it just went slamming down. Anyone know why it did that? TIA
 

Flea76

Hatching
Jan 9, 2022
1
0
1
I purchased the automatic door from omlet and attached to my existing wooden coop. I've had it for about a year now. I get the occasional "wiring fault" error but it is rare and I have figured out how to fix that little "bug" in the system.
About 3 days ago my auto door stopped closing at night. It is set on a timer. The error said "door fault". So I had to close manually, however the door will just continue to open and close over and over again until I hit the button a second time to make it stop in the closed position.
I was able to close it manually a couple nights and it would reopen on its own in the morning. But today I had to open it manually as well.
I did a factory reset, made no difference. My next step is to disconnect the wire and re connect, but aside from that, I'm clueless. Has anyone had this issue? Is my door just busted permanently?
I did test the crash bar by blocking the entryway with an object, and the sensor successfully detected the object and reopened. But it will just keep opening and closing by itself.
Hello! I have just started to have the identical problem with my omlete door, after I changed the batteries for the first time. I wonder if you got a solution?
 

New posts New threads Active threads

Top Bottom