How do I attach hardware cloth to dog run panels?

I use hog rings and 2' hardware cloth. I don't have any pic of it specifically. If you zoom in you can see it in the back of these turkey pics. I think I have them, hog rings, every 9-12" in 2 row.

IMG_20190825_131518079.jpg IMG_20190822_133838667.jpg
 
All kinds of good possibilities. For longevity it seems like galvanized or stainless steel hog rings with screws and fender washers on the tube frame might work out. Stainless can rust if it comes in contact with carbon steel. I used stainless steel j clips on my brooder cage. Klubertanz has a good selection of hog rings, nice wire, and cage supplies.
http://www.klubertanz.com/
I thought about electric wire but wondered about breakage when it is bent too far. Plus, using wire tie offs, even a thicker more malleable type, might cause a lot of sharp edges to get cut on. Good quality zip ties would be the easiest, though, and easiest to replace down the road. Decisions, decisions.
I didn't see the ss cable ties, that might work well.
 

New posts New threads Active threads

Back
Top Bottom