- Thread starter
- #11
Chihuahuamom
to curve the roof you would have the 2x4 or 2x6 that makes the ridge. simple make the ridge a 2x8 or 2x10 depending on the effect then measure to the center of the width of coop measure down 2-3 inches then cut ridge on bolth slopes toward center of coop then apply the ply wood roof and cut off the extra plywood hanging past the sloping ridge...
if this is confusing let me know and i will post new info thanks...
to curve the roof you would have the 2x4 or 2x6 that makes the ridge. simple make the ridge a 2x8 or 2x10 depending on the effect then measure to the center of the width of coop measure down 2-3 inches then cut ridge on bolth slopes toward center of coop then apply the ply wood roof and cut off the extra plywood hanging past the sloping ridge...
if this is confusing let me know and i will post new info thanks...