It's offical I am the worst Hatcher

Quote:
Well, you keep cleaning up before I get to see anything. (joking)
lau.gif
lau.gif


3chickens, were are you? We are waiting.
pop.gif
pop.gif
caf.gif
caf.gif
 
Quote:
I think there's already instructions on how to candle on the thread & I would just follow them. If you're on day 18 I would take out both plugs for circulation of air. the eggs need the air to be cirulated well for developement & then for hatching. And yes that will help lower the humidity too. I know you say the temp is off by being 1 degree higher than the other but the question is how high is 1 degree higher...? I actually have several thermometers that are all inexpensive ones from sears, walmart & the ones that came with the bators of course. I try to get them in the middle of one another & use that as a guide so that they're all around 100.F so if one is a tade higher & another a tade lower they're all still in the ballpart & then I see where the digital is in it's ready & I'll try to keep to that just because it's easier to read when I need to be quick about it. So If you've got the bator set with one temp saying 100.F & the other is at 101.F I'd just keep it there. I think more important at this point for you is taking the plugs out & I would be candling to see if there's developement. There's actually videos on youtube you can watch to see others doing it & if you've got brown eggs you just need to do it in a real dark room like at night in a closet..

bumping this up so you can see.
 
OK finally did it!!! And am happy to say no dead chicks
wee.gif

Looks like infertile eggs so I guess I am gonna go out and kick my rooster right in the butt!!!
rant.gif

So I guess my single chick was it...
yippiechickie.gif
 
20413_p6010772.jpg

This is what I have in the bator:
Row 1, 2,3 Set On June 10 Aracanas I got from ebay with my marans
Row 4,5,6 EE's Set June 15 from a ahappychic and my Marans
Hopefully I can get something to hatch... I figure with the EE's and Aracanas something has to be fertile...
Oh yah!! 1 silkie row 5 second 1 down
wee.gif
 
Accuracy varies in instruments that are not designed to be extremely precise, like the Egg Temp incubator thermometer, which is accurate to within .18 degree, I believe. The room thermometers vary alot. I have two AcuRites with probes. One reads 10% too low on humidity every time and one reads a degree high on the unit temp at the top, but from using others, I have figured it out. And you can calibrate hygrometers to see how off they really are.
 

New posts New threads Active threads

Back
Top Bottom