- Apr 12, 2014
- 5
- 0
- 6
Thanks going to store getting digital today!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
THe question I would ask is where you are taking that reading??When incubating at 99.5-100 with this incubator is hatching delayed??? I am on day 24 with nothing. All eggs looked good at last candle
x2 I do my measuring from top of eggs still air 101-102 and forces air 100-101THe question I would ask is where you are taking that reading??
I take readings at about half the height of the eggs. THat would be 99.5-100 with a fan.
IF a still air is being used, then 102 at the top of the eggs is the correct temp.
Some eggs take longer like marans eggs-- are these marans eggs?
I did both on top of eggs and on bottom. So lesson learned to increase temps. Candled eggs nothing past previous timeTHe question I would ask is where you are taking that reading??
I take readings at about half the height of the eggs. THat would be 99.5-100 with a fan.
IF a still air is being used, then 102 at the top of the eggs is the correct temp.
Some eggs take longer like marans eggs-- are these marans eggs?
Quote:I suggest try again with fresh eggs. Use a good thermometer and measure in several places like always 1/2 the egg height.I use a paper cup cut to that hieight to hold my fish tank thermomters; or lay the![]()
lg's thermomter w/ plasticbase on top of the eggs and then lay thermometer on that. I used to measure several places AT THE SAME HEIGHT and average them. It is not100% uniform around the incubator. And a good reason to move the eggs around OR turn the lid.
thanks! !! Collected more fresh eggs yesterday.I suggest try again with fresh eggs. Use a good thermometer and measure in several places like always 1/2 the egg height.I use a paper cup cut to that hieight to hold my fish tank thermomters; or lay the
lg's thermomter w/ plasticbase on top of the eggs and then lay thermometer on that. I used to measure several places AT THE SAME HEIGHT and average them. It is not100% uniform around the incubator. And a good reason to move the eggs around OR turn the lid.