blayt90
Crowing
This is my attempt at building a incubator. I am using a VFD enclosure that was going to be trashed. So far I have welded up the holes where the power was run to and from it. I also welded up the fan openings on the back and top that were used to cool off the internals. I cut the openings to circulate the air inside and I have test fitted the fan and screen I plan on using. I have also build a cover for the large opening that is on the tunnel that will house my heater, humidifier input, controller and fan. And suggestions are very welcome. I do plan on cleaning it up and painting it.