So being bored with this stay at home policy due to Covid-19 I decided to try to cut back on the waste by chicks.
In the 5 gallon Bucket I use to have elbows in it. I decided to try something a little different to see if it would work better. Using what I had around I ended up with an flower planter. The 5 gallon bucket has 2” holes drilled about 1 1/4” from the bottom.The flower planter has 1” holes in it as close to the bottom of the planter as possible.
Pictures explain it much better than I could so here goes.
If you want to stop this mess:
Maybe you should try this :
This could be made many different ways. For one I would prefer to use a funnel upside down in the middle of the feeder instead of the round feed holder but that’s what I had on hand. I will surely post back letting you guys know if it cut back on waste.
Stay healthy BYC !!!!
Before it gets said yes I put a lid on the 5 gallon pail.
In the 5 gallon Bucket I use to have elbows in it. I decided to try something a little different to see if it would work better. Using what I had around I ended up with an flower planter. The 5 gallon bucket has 2” holes drilled about 1 1/4” from the bottom.The flower planter has 1” holes in it as close to the bottom of the planter as possible.
Pictures explain it much better than I could so here goes.
If you want to stop this mess:

Maybe you should try this :












This could be made many different ways. For one I would prefer to use a funnel upside down in the middle of the feeder instead of the round feed holder but that’s what I had on hand. I will surely post back letting you guys know if it cut back on waste.
Stay healthy BYC !!!!
Before it gets said yes I put a lid on the 5 gallon pail.

Last edited: