In Texas I'd take the whole soffit off and replace with 1/2" HC.GC that is a great idea to drill holes in the soffit!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
In Texas I'd take the whole soffit off and replace with 1/2" HC.GC that is a great idea to drill holes in the soffit!
Missed the fan part, was thinking passive ventilation.ill Have the entire cubic footage of air in there exchanged 2 times per minute with that exhaust fan. There is a one square foot window, plus the two three inch round vents up top. Is that not enough?
I haven't done a bunch of research. . ... but always think the low VOC and nursery safe paints must be fine.Does anyone that really knows what they are talking about have suggestions for paint products?
How did you remove the window screen?I am the new proud owner of a medium OverEZ coop. Picked it up used for $200. It’s in fantastic condition! Just scraped and vacuumed it out last night and sprayed it down with insecticide, will be power washing this weekend. I am looking for ideas and pics of mods others have done as I have a week or two to clean it and do any modifications before making the switch from my current coop. Here is what my plan is so far:
Install combo dual muffin fans / electrical outlets on top of back wall
https://www.amazon.com/dp/B07S79SVMG/?tag=backy-20
Cover the outside of that hole with a 16x10”return register
https://www.amazon.com/dp/B0064Q8ZOM/?tag=backy-20
Replace window screen with hardware cloth
Install ADOR1 automatic door in pop door location (who else has done this and did you do external or internal mounting? Pics?)
Install timer and LED light strip onto ceiling
https://www.amazon.com/dp/B07QD4Z7ML/?tag=backy-20
https://www.amazon.com/dp/B01HBT32PW/?tag=backy-20
Caulk all cracks on the interior between walls and framing, and where framing boards join together
Apply sealer to entire inside, paint floors white
https://www.amazon.com/dp/B00KY2Z3Y2/?tag=backy-20
Any other ideas?
Please DO NOT ORDER from this company. To say im speechless, would be to understatement whereas, the severity is surreal. First, every single board was SPLIT (was not done in shipping, they actually intended to send it this way) add to this to 50% mis-cuts and even (many boards are warped). In order to use any portion or build, you'll not only need your own 2x4 & 2x2, you'll need to route or jig to get the measurements correct. I especially appreciate the Mud-Wasp nest we found inside the coop as we tried to build. We used our own deck & wood screws because the ones sent, were bent. Yes, nothing was right. The severity of the damages, shows they intended to defraud us. I tried to call. I sent photos and emails. I reached out to the finance company, who, btw is as bad or worse, as they appear to o post, trying to drive this company below a 2 rating. FINANCE COMPANY "Bread") They have conspired with this company to steal & defraud. We intend to sue in Federal Court, if necessary, as its multi-state and Diversity Jurisdiction applies. If you oreder from these people, you deserve what you get.I am the new proud owner of a medium OverEZ coop. Picked it up used for $200. It’s in fantastic condition! Just scraped and vacuumed it out last night and sprayed it down with insecticide, will be power washing this weekend. I am looking for ideas and pics of mods others have done as I have a week or two to clean it and do any modifications before making the switch from my current coop. Here is what my plan is so far:
Install combo dual muffin fans / electrical outlets on top of back wall
https://www.amazon.com/dp/B07S79SVMG/?tag=backy-20
Cover the outside of that hole with a 16x10”return register
https://www.amazon.com/dp/B0064Q8ZOM/?tag=backy-20
Replace window screen with hardware cloth
Install ADOR1 automatic door in pop door location (who else has done this and did you do external or internal mounting? Pics?)
Install timer and LED light strip onto ceiling
https://www.amazon.com/dp/B07QD4Z7ML/?tag=backy-20
https://www.amazon.com/dp/B01HBT32PW/?tag=backy-20
Caulk all cracks on the interior between walls and framing, and where framing boards join together
Apply sealer to entire inside, paint floors white
https://www.amazon.com/dp/B00KY2Z3Y2/?tag=backy-20
Any other ideas?