Problems with my HHD 12 Egg Incubator

[Paul g]

So this incubator is not a good one? My friend has it and hers hatched well. So I got same brand. It’s weird. It was working fine, reading 38.5 then when I put the eggs inside and set it on the shelf the low heat alarm went off which I expected it to drop some. So I was trying to get the alarm off and somehow it’s went to this to where now I can’t set temp under 70 nor higher then 103 which is the farenheight temps for those numbers so it makes me think it flashed over to farenheight but weird cause it still says Celsius.

HI did you manage to sort the temp issue with no decimal point as mine has done it and I can't change it bk. Thanks.

 

[mikesch]

I recently got the HHD 12 egg incubator and I been trying to set it up but am total lost. I had it set on the correct temperature of 38c. The alarm was going off so I tried to change the numbers of the low alarm and now I cannot get it back to the screen to show temperature where I can put it back to like 38.5. When I turn it on it just shows 100 degrees Celsius with no dot in it. And all the levels will not let me change between 86 -103 and that’s it. It’s almost like farenheight temperature but says Celsius. Please help cause 2 hours later I am lost.

I had the same problem here, after restoring factory settings the device showed the temperature in °F instead of °C.
This helped: Plug off the device, press "-" while plug in. My device showed °C again!

 

[mikesch]

I recently got the HHD 12 egg incubator and I been trying to set it up but am total lost. I had it set on the correct temperature of 38c. The alarm was going off so I tried to change the numbers of the low alarm and now I cannot get it back to the screen to show temperature where I can put it back to like 38.5. When I turn it on it just shows 100 degrees Celsius with no dot in it. And all the levels will not let me change between 86 -103 and that’s it. It’s almost like farenheight temperature but says Celsius. Please help cause 2 hours later I am lost.

Had the same problem here, this helped: Turn off the device (plug off), press "-" while plug in. My device showed °C again.

 

[Sbutler]

The eggs were not inside. I took them out. It was originally reading 38.5 as supposed too but now there is no decimal. It seems to me it’s reading farenheight temperatures cause feeling it it is definitely not the temp it is saying. It feels the same as it did at 38.5

Mine is doing the same thing and I just opened it and it doesn’t have the calibrate settings

 

[elepricon]

Mine is doing the same thing and I just opened it and it doesn’t have the calibrate settings

I had the same problem. After trying everything the following procedure solved the problem:
Unplug it, then press the button for "up" or button no. 7 and HOLD it while plugging the cable back in. That's it. After that it should show again the former settings with Celsius.