Project Shed-To-Coop

Thank you .. x2
By the way, the only reason I needed that large a battery is that it'll also be powering a small heating pad that will sit under the battery and keep it above freezing during the winter, and when it's activated that pad will use more energy than every other load combined. Without that I could have made do with a battery with roughly half that capacity.
 
Looks great! I used APOC (an elastomeric sealant I had bought for the roof of the coop) and while it is sturdy, the roost bars and ramp still get poop-caked pretty quickly. I'm just resigned to it now.
 
Looks great! I used APOC (an elastomeric sealant I had bought for the roof of the coop) and while it is sturdy, the roost bars and ramp still get poop-caked pretty quickly. I'm just resigned to it now.
I can't remember, do you use zeolite (Sweet PDZ) on your poop trays? (A bit of a challenge for the roost bars, of course.) I'm amazed at how good a job it does in releasing the accumulated poop bombs from surfaces.
 
I can't remember, do you use zeolite (Sweet PDZ) on your poop trays? (A bit of a challenge for the roost bars, of course.) I'm amazed at how good a job it does in releasing the accumulated poop bombs from surfaces.
I'm interested in the answer too, as that's what I'm planning to use in my tray.
 
I can't remember, do you use zeolite (Sweet PDZ) on your poop trays? (A bit of a challenge for the roost bars, of course.) I'm amazed at how good a job it does in releasing the accumulated poop bombs from surfaces.
I don't have poop trays. The coop is 4x12 feet and I just use deep bedding in all of it, and the roost bars are about 3 feet above the floor. It's pretty easy to take care of the floor part of it.
 

New posts New threads Active threads

Back
Top Bottom