Alright, started construction on the new rabbit cages today. Decided to build a single panel of 3 levels. Each level is 4 feet wide and 30" deep. It will have a removable divider in the middle of each level.....so I can make either two 2 foot wide cages, or a single 4 foot cage.
didn't quite finish. Still need to put the dividers in the middle of each level, and put all the wire on the sides and front, plus a roof.
Started off making the wire floors.
Then the frame.
then combined those together
Then put up the plywood (primed already)
I have the big metal oil drip pans for cars under each level to catch poop and pee. They are only 2 feet deep, leaving 6 inches in front with no tray, but I will be putting ceramic tiles on the wire there with food and water dishes, so hopefully that wont be a problem. You can see a "track" of sorts that they slide in on under the top two levels.
It was SO HOT today and I pretty much gave myself heat exhaustion doing this. I worked for about 3 hours to do the above. Yuck. So it may take a couple more days to get it finished.
These would work for chickens too......