What are the dimensions of this bucket?We've decided to use these buckets that our local feed supply store gets in with product.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What are the dimensions of this bucket?We've decided to use these buckets that our local feed supply store gets in with product.
Hello aart! The buckets are 13" wide x 13" deep x 16" tall. Do you think that is big enough?What are the dimensions of this bucket?
Yes.Hello aart! The buckets are 13" wide x 13" deep x 16" tall. Do you think that is big enough?
We've got a video up now on our YouTube channel (link in my signature) on how Dan made and installed these - and how the chickens are liking them. I don't want to link to it in my post - do not want anyone thinking it is spam? Is it allowed? It is our most recent video - posted yesterday. We are thinking of putting some traction strips on the inside of the lids where they jump up. What do you think?Yes.
Curious to see how you have them set up for easy access for the birds and also still be able to use the lid for closing off nests.
You can link a vid on your posts, I'm not going to scroll thru your channel trying to find it.....I'd rather just see a few pics tho.We've got a video up now on our YouTube channel (link in my signature) on how Dan made and installed these - and how the chickens are liking them. I don't want to link to it in my post - do not want anyone thinking it is spam? Is it allowed? It is our most recent video - posted yesterday. We are thinking of putting some traction strips on the inside of the lids where they jump up. What do you think?
Pretty slick...great job with the lid cables and keyhole hangers!You bet! He ended up using coated wire - these are really stable. I am surprised how stable the lid is when open. The hens had no trouble jumping up and standing on the lids, save for just a bit of foot sliding on the lid - that's why we are thinking of the tractions trips, though they did not seem to mind. Keyholes on the back made a really stable attachment to the walls. I am a little concerned about the nesting material. The ha
You bet! He ended up using coated wire - these are really stable. I am surprised how stable the lid is when open. The hens had no trouble jumping up and standing on the lids, save for just a bit of foot sliding on the lid - that's why we are thinking of the tractions trips, though they did not seem to mind. Keyholes on the back made a really stable attachment to the walls. I am a little concerned about the nesting material. The hay seems like it's not very soft to lay on. I don't know if that matters for them?
Linking now to the video also in case anyone else is interested in seeing the full process - the video also shows them jumping up on it. Timestamp 9:26 on this shows where they are jumping up.
Thank you aart! There are 16" in between the lids when they are open so I think it will be okay? Good to know about the hay - I will probably go in and squish it down a bit and bowl it out as you were talking about. After shooting the video, we opened them all up and one jumped up on top of the top nest box and then just plopped down on the lid to check out the inside. If they start roosting up there we will definitely need that angled board.Pretty slick...great job with the lid cables and keyhole hangers!
They might try to roost on top, especially if nests are higher than roosts.
A sharply angled board on top will take care of that.
....and can they get into the lower nest when the upper ones are open?
Might not even need those upper nests, I have 4 nests for up to 18 birds and it works out fine.
The hay might seem 'poky' but they'll tamp it down.
I use straw but stuff a flake in tight and bowl it out a bit and push down any sharper piece sticking up. When they first start laying, and even after, they can tear the bedding up rather exuberantly.