The Waiting is the Hardest Part...

So high humidity could shrink them right?
Too high humidity won't allow the eggs to lose enough moisture which can lead to the chicks drowning in there but this usually happens if the humidity it too high throughout the whole process.
There is no need for higher humidity until you see an external pip.
 
I always thought the opposite
I’m still trying to grasp this but this article that I found last night leads me to think that if humidity is too high, the air cell will be too small and if the air cell is too large, humidity is too low.
 

Attachments

  • 83DD6A92-71A1-46EC-A89E-82894FBFCAD0.png
    83DD6A92-71A1-46EC-A89E-82894FBFCAD0.png
    734.9 KB · Views: 5
  • 58D6605F-24B6-482B-A248-D72C8D3CA6BF.png
    58D6605F-24B6-482B-A248-D72C8D3CA6BF.png
    654.5 KB · Views: 4
Always follow the manufacturer’s instructions for humidity and temperature; it can vary among different incubators.
 
I’m still trying to grasp this but this article that I found last night leads me to think that if humidity is too high, the air cell will be too small and if the air cell is too large, humidity is too low.
This is correct but this is for the entire incubation time.
Come lockdown time you want those air cells getting bigger by the day.
 
if humidity is too high, the air cell will be too small.... and if the air cell is too large, humidity is too low.
Pretty much. Have you been tracing the air cells when you candled during incubation?
I do it on day 7-10-14-18. Sometimes adjusting humidity based on cell size.
I leave them alone after day 18.

It won't hurt a thing to candle them right now real quick.
Yah every hour on the hour, right? ;) :gig
 

New posts New threads Active threads

Back
Top Bottom