Wait, wait, hold on...(Egg-turning Question)

[silkiechicken]

Quote:
On the contrary. I love my flashlight and think it's the best candler in the world Of course it was a pricey custom bugger but I love it! I can candle by just moving the light over each of the eggs.

For example.

And here she is out of her pouch.

Plus, with a flashlight, you can blind people in the dark when they are bugging you trying to watch your chickens sleep. I carry it daily.

 

[Davaroo]

What is the purpose of the water wigglers I keep seeing in some people's incubators?

They are what is called a buffer. They act as "simulated eggs" and give you a true indication of the temperature the egg is feeling.
The temp controllers in incubators are air temp controllers, since incubation is a convection process.
That is to say, the heat in the air is transferred to the egg.

The problem with this is that air is not as dense as an egg so it reacts faster to changes in heat. It also stratifies, being different in any one part of the chamber compared to another. If you only monitor air temps you arent getting a true reading of the egg itself.

The water weasel buffers these rapid changes and varying air temps to let you know just what temps the the egg is really at.

Since an egg is mostly all water, you can make buffers from a plastic baggie with water in it, rolled and held with a rubber band to form an "egg." Or you can do what most people do and just get some wigglers. Regardless, you must have a probe-type thermometer.​

 

[Davaroo]

On the contrary. I love my flashlight and think it's the best candler in the world Of course it was a pricey custom bugger but I love it! I can candle by just moving the light over each of the eggs.

Lots of people say that and it's something that is individual. My opinion? Piffle!
I have tried the flashlight method and have not been as satisfied as when using a candler. I got one of those super mega bright lights and it DOES work, but not the same way a candler does. Mine is cheaper, too.
Flashlights I got, I just use them now for things besides candling.

Let me break with more tradtion. Here goe:
Candling is over-rated and something you dont need to do much of, anyway. It's only needed once when the eggs are set, to spot defects and once during incubation, at day 10.

All the 7-14-18 day candling people do is just to have something to do while they wait. There is no need, since you can't change the outcome anyway. You also mess with the incubators conditons when doing it and risk damaging the fragile embryo if done poorly and too soon.

Dont buy some pricey light for something you use but rarely and which is really a compromise. Make a useful, but cheap one.​

 

[Davaroo]

What is your opinion, if any, of this incubator?
http://lyonelectric.com/R-ComMini.html

The R-Coms strike me as toylike. Having said that, let me also say that I have never used one. So MY opinion counts for little. They work, I guess, but most people who use them move up pretty quick. Dont waste your time. I say, save your money til you get enough for the real deal.​

 

[silkiechicken]

I agree with the R-com. It does seem rather toy and gadget like. I wouldn't be one buying it.

I usually candle for fun to get pics for people to see. Really the flashlight makes a VERY expensive candler but it was a gift for walking on campus late at night... just found another use for it! 100 lumens out the front makes for bright lights! Did you know there is like a whole cult of people into flashlights!!! They are crazy with what they do.... I bet they think the same thing about us.

 

[Davaroo]

Did you know there is like a whole cult of people into flashlights!!!

Yeah, Im one. My wife has learned that to make me happy, get me flashlight as a gift.​

 

[Draconargentum]

Huh...I thought it might be okay since I found it on Lyon's website. Well, what do you think about this one, then?
http://www.lyonelectric.com/mturnxauto.htm
I can't seem to find a price on it, nor one with just the incubator and things directly related to that, but is this one actually made by Lyon, at least?
EDIT: Ah, correction, it runs $395. Is this worth that?

Really what I'm trying to do here is find out a general idea of what I can expect this certain brand of bator to look like. ^_^;

 

[Crazy4Chickens]

I have a r-com 20 and love it. Once calibrated and tested it for several days in the beginning it runs great. I only have to check the water level and add water when needed. Good luck on what ever one you choose.

 

[Davaroo]

Well, what do you think about this one, then?
http://www.lyonelectric.com/mturnxauto.htm
I can't seem to find a price on it, nor one with just the incubator and things directly related to that, but is this one actually made by Lyon, at least?

Superb. Ultra reliable and a better value than one of the top of the line foamie's.

EDIT: Ah, correction, it runs $395. Is this worth that?

I can't say what is a good value for YOU. For me, yes. Why? It will last a lifetime, is proven and has good resale value should I want to sell it. I also figure that once the money is spent, it is gone and that is that. When I get all the value for the money that the Lyon's offer, I then figure its good money spent. In other words, value.

You can also shop them around and maybe get a
better price.
Double R Supply has them for 359$ with auto turn, 259$ without.

Here's a goo write up on it:
"The Mighty Turn-X Incubator," By Mike DeSart
Updated 06/21/2005
Courtesy of the Bird Barn

PLEASE NOTE: Although this article is primarily about Lyon’s Turn-X incubators, much of the information and food for thought contained in it can apply to any incubator. And even though it is as much of an infomercial as an article, I feel that I can only help the bird breeding community by sharing my experiences with, and pointing out the low cost benefits of, what is one of the most plentiful units in use today. It shows that a Pinto can get you there even though its not as comfortable as a Lincoln Town Car. And remember, even the most expensive cars still have breakdowns.

Why do I call it the Mighty Turn-X Incubator? Well, it kind of goes back to being a Pipe Organ Technician for the last twenty-five or so years and working on Wurlitzer theater pipe organs. These organs were called "The Mighty Wurlitzers". The reasons that they acquired this name would probably be that their actions were very fast and reliable, and their tonal qualities were versatile and always in great demand in the theaters to accompany silent movies and provide a concert during intermission. They were not the most or least expensive organs, but for the money, they did a wonderful job. I thought "The Mighty" would apply to the little Lyons Turn-X for similar reasons. It is not the least expensive incubator available and is definitely not the most expensive unit on the market. It is reliable; it does do a good job when properly set up, and is very versatile. When a Wurlitzer Organ was set up properly and played by the right individuals, it did a fantastic job. The little Lyons Turn-X Incubator may or may not do a fantastic job. But it does do a very adequate job. And, as long as it will incubate and hatch eggs and make a good brooder or brooder top, what more do you want?

The Turn-X has the four components that I feel are necessary to maintain high hatchability for your eggs. It has a fan to circulate the air within the dome, an effective easy to adjust humidity control, an egg turner that will roll the eggs around 180 degrees, and a very accurate temperature sensing thermostat for the heat source. I will elaborate on these components in the next four paragraphs.

CIRCULATING FAN

The motor driven fan circulates the air within the dome past the heater coil and the humidity source. I feel a circulating fan is necessary so the incubator will regain its temperature and humidity very quickly after the dome has been opened and closed. Still air incubators don’t recover quickly after they have been opened to take out or check an egg or add water etc. This means that your eggs are going to be cooled occasionally and the humidity will be poorly maintained. If your incubator has low humidity and a slow temperature recovery, your eggs will loose their moisture faster than they should and be at a lower than ideal temperature at times. Both of these conditions will cause reduced hatchability of your eggs. The second benefit of having a fan is that the temperature will be more uniform throughout the egg chamber. The moving air will help reduce the perceived severity of the hotter and colder areas of the incubator. I say "perceived severity" because all incubators seem to have areas in them where thermometers will show more or usually less than the ideal temperature. I believe these anomalies are caused because the air currents in the incubators are very seldom uniform in velocity, and the velocity of the air past a thermometer bulb will affect its reading. While the round TX dome probably has a more uniform airflow than a square unit, I doubt that the temperature in most popular incubators really varies enough from air flow problems to be detrimental to the incubation process. I can see, however, that problematic uneven airflow could exist in an incubator or brooder with a poorly placed warm air outlet and/or makeup air inlet, or if the warm air was poorly diffused.

HUMIDITY CONTROL

The humidity system is very simple. It consists of a compartmented base and a "neck pointed down" water bottle that is adjusted by raising or lowering a large plastic nut on its neck. The height of the bottle's mouth determines the depth of water in the base. Each compartment in the base has a higher gate than the previous one next to it. When you raise the water level in the base, you increase the number of compartments that will fill with water. The more compartments you fill, the more water surface area you have in the base. The more surface area you have, the more humidity you will achieve in the dome. Very simple but very effective.

EGG TURNING

To my knowledge, the Turn-X egg turning feature is unique in the industry. It rolls the eggs across a screen by pushing them with a rotating circular spoked turning ring once each hour. The eggs are turned in a manner similar to the way a hen would roll them. Most incubators have egg-turning trays that frequently do not attain sufficient egg rotation to maintain the hatchability of psittacine eggs. This is not so with a Turn-X turner. The throw on the turner's arm can easily be adjusted so that most eggs will roll about 180 degrees during a turning cycle. Even if you have to mix macaw and Painted conure eggs in the same ring, the placement of the eggs in the ring and the amount of turning arm throw can be adjusted so that both size eggs will turn a little more or less than the desired 180 degrees. Goose and turkey eggs are too large for the amount of throw available from the turning arm on the turner and have to be turned by hand at least once a day. The only better egg turning method I have seen, other than a hen, is the twin rod system. Two rubber or plastic covered rods with variable spacing are linked together with belts, chains, or gears and rotated with an electric motor controlled by a timer. The timer governs the amount of egg rotation and the spacing is adjusted to the size of the eggs. A turning system of this design with quality components does the job very nicely, but is very expensive. Also, large and small eggs cannot both be placed on the same rods at the same time.

TEMPERATURE CONTROL

The temperature control uses a solid state switch controlled by a zero crossing integrated circuit trigger and a temperature-sensing resistor. This means that the heater coil switch is turned on when the AC voltage is near zero to increase switch life and reduce noise. Not the newest design by any sense of the imagination, but it has proven to be nearly bullet proof by operating for many years with few if any failures per unit. It is capable of maintaining temperature within a few tenths of a degree. It has a surge suppressor and an over temperature safety backup switch on the printed circuit board. That way, if the heat switch should lock on, the mechanical safety will turn it off to prevent over heating and damage to the dome.

The above four components are essential to a successful incubator. All other features on incubators fall into the bells and whistles category. One of the most useful additions would be a battery backup that would supply 120 volts AC. Unfortunately these units are very expansive and their backup time limited, but they should be available from computer stores. You can figure backup time for a Turn-X using an average power draw of 50 watts.

THERMOMETERS - DIGITAL AND MECHANICAL

Digital thermometers with remote probes are nice to have and can be added to any incubator for $15 to $30 from Radio Shack. I like the units with a very large display that you can read at a glance when walking by. Units with both temperature and humidity are also available and are very handy for setting up your incubator initially. But they must be placed in the incubator to obtain readings during setup and then removed, as they usually don’t have remote sensors. Also, any of the digital units should be checked against a standard or at least another unit before using them for setup. I always have a 6-inch analog mercury (or spirit) thermometer, like those included with the Turn-X 7, available to use as a standard or to verify that the temperature in my incubator really has changed when the cheap digital thermometer says it has. In other words, don’t trust battery operated thermometers because so many things can go wrong with them. Instead, use them as easily noticed warning devices that don’t require nose to the dome squinting at a thin column in a glass tube with tiny marks on it.

BACKUP TEMPERATURE CONTROLS

Temperature controls can fail three ways. Open - the heater is never turned on. Shorted - the heater is on all the time. Loss of regulation - the control does not maintain either the proper or a constant temperature. Redundant temperature control units are probably the most common thing you would like to add and are also one of the most difficult features to have operate successfully. This feature should not be confused with the safety unit in the Lyons incubators, which opens the heater power circuit somewhere between 105 and 120 degrees and is intended to prevent damage to the dome. It will not prevent over heating of the eggs. The backup control unit desired is one that will take over when the primary unit fails and protect the eggs until they can be moved to another incubator. Over temperature safeties frequently turn out to be a mechanical wafer diaphragm and switch assembly, put in series with main control and set to a higher temperature. If one of these units has to take over control for very long, hatchability of the eggs would probably suffer. They have to be set somewhat higher to keep them from interfering with the main control and their temperature fluctuation can be several degrees. If you put a second solid state control in series with the main control and set it a few tenths of a degree higher than the main, it would serve as an over temperature safety. But if either control failed open (see above), the heat would not be maintained because the controls are in series. If you put a second control in parallel with the main control and set it a few tenths of a degree lower than the main, it would serve as a low temperature backup. But if either control failed shorted (see above), the incubator would overheat because the controls are in parallel. When you consider that these extra controls cost $50 to $100 each, make it more complicated to adjust the temperature, and still can not eliminate failures of the temperature control system, it becomes clear that these are not good options. A high and low temperature warning alarm system would be a good alternative to have and some are now available from Radio Shack that are very reasonable. These alarms are not very loud but with a little ingenuity, an attention attracting alarm could be triggered by the Radio Shack device.

TURN-X VERSATILITY

The little Turn-X incubators are probably the least expensive units on the market that have all the essential ingredients to be successful and the most versatile. They are small in size and can be setup in many places where you can’t put a larger unit. You can have several of them and put eggs from different areas or clutches in different incubators for a moderate price. Everything is visible inside the clear dome so you can watch the eggs turn or hatch. The TX units are easily converted into hatchers or brooders and can be used as a very accurate heat source for your home made brooder or hospital unit.

HATCHER

Using the extender portion of my $10 hatcher/brooder accessory, you can convert this little unit (without the egg turning motor) into a hatcher. You only have to put the extender between the base and the dome and lower the temperature from 99 to 98 degrees. Also, the water bottle must be raised to add more water area in the base to bring the dome humidity up from 45% to about 75%. Aside from providing more ideal conditions for piping eggs, moving your piping eggs to a hatcher will mean the rest of the eggs in the incubator are not constantly subjected to changes in temperature and humidity every time the progress of the babies is checked.

BROODER

Use the dome and both the extender and bottom portions of my $10 hatcher/brooder accessory to make a nice little brooder for the first couple of weeks of a baby's life. Add water for humidity in a reclaimed one pound butter tub with holes punched in the lid. The holes should be sized to allow the humidity (evaporated water) to get out and prevent babies from falling in. The babies can be put in individual tubs or turned loose on bedding in the brooder.

ACCURATE HEAT PROVIDER

Another use for the TX dome is as a heat source for home made brooders. Simply cut a hole in the top of your home made brooder slightly larger than the diameter of the dome (not the flange). Place the dome in the hole (It should rest on the flange). Set your temperature and away you go. Note: Square or rectangular brooders with sliding or trap doors will not have uniform temperatures through out. Use this to your advantage. Place your newest babies under the dome (on a pedestal if need be), and the older babies nearer the perimeter of the brooder. If building brooders isn’t your cup of tea, I have several very nice Lyon’s ICUs available.

WHY TURN-X NOT BRAND-X AS A HEAT SOURCE

Most incubators are full of tilting trays, sliding or rotating grids, or some other apparatus that would impair the easy use of the heat source in a foreign environment. With the little Turn-X dome, you simply unhook the turning arm push/pull rod, take the dome off the base, and set it on whatever you want to heat.

I NEVER SAID THE TURN-X WAS PERFECT

Of course, like anything else there are some down sides to this unit, but they can be overcome. After using Turn-X units for over 25 years, the operational problems and the solutions I found for them are as follows:

Vibration and noise from the motor/fan assembly. This can be overcome by balancing the motor armature and fan and adding motor mount isolators. This eliminates the problem but is not something most breeders will want to try, so I offer a setup and motor modification package on new units and a service and motor modification package for your used units.
The heater unit is only about 60 watts. A lower wattage element was probably used to keep the heat cycle gradual with a reasonable cycle time. The 60-watt heater does limit the size of the area you can bring up to incubator/brooder temperatures for a given ambient temperature. If you put your dome in a cold room and try to heat a fairly large, poorly insulated area, it may not keep up. Insulating your brooder may solve this problem.
The heater thermostat is in the upper part of the dome close to the heater. It will maintain the temperature of the air supply to the dome within a few tenths of a degree. But the dome temperature is also dependent on the ambient temperature due to heat loss through the plastic and the intake of air through the circulation holes in the dome. This means that to have optimum temperature control for the eggs, you will need to keep the incubator in a room that is fairly close to the same temperature all the time. If the room housing the incubator is usually around 70 degrees and you have some hot days that get up to 100 degrees, you probably won’t have a problem. But, if that same room drops to 50 maybe even 60 degrees at night, you are probably going to have a problem. The obvious solution would be to put the temperature sensor down where the eggs are, and this could be done. But, the sensor in the dome is somewhat fragile and would be prone to damage. Also, changes in air currents caused by the placement of objects in the dome could adversely affect the temperature sensor's ability to maintain the proper setting. The next obvious solution is to create or find a fairly stable environment to run the dome in, such as an insulated area or room.
Obviously the little unit will not hold as many eggs as large units, but in most cases, exotic breeders only have a limited number of eggs of various sizes at any one time. The fact that it will hold 48 cockatiel and lovebird eggs or 27 cockatoo, macaw, amazon, grey size or smaller eggs will generally handle the requirements of most breeders. And if it doesn’t, they can acquire one or two more Turn-X units at a lower investment when compared to acquiring one of the other equivalent incubators on the market. Breeders usually want to have more than one of these units anyway to separate eggs from different nests, different clutches, different rooms, what have you. And, as I discussed before, additional units can be used as hatchers, brooders or backup units in case any of your domes in use should happen to require service. Smaller breeders usually don’t have the option of having multiple units when using expensive incubators, because of financial constraints. Even larger breeders usually have other uses for their money other than acquiring expensive incubators as backups.
The screen that the eggs roll on when pushed by the spoked turning ring is made from one-fourth inch mesh hardware cloth and is difficult to make it lay flat. When the screen is not flat the eggs tend to roll erratically and cause concern in the minds of the surrogate mothers observing this phenomena. I have never found this to be detrimental to the eggs since the egg can’t roll far enough to build up much speed and the ring takes 30 seconds to turn the egg 180 degrees. The hens in the nest probably don’t roll the eggs this gently considering the coarseness of some of the material on nest box bottoms. I am assuming that at least a minimum effort was made to flatten the screen. If all this bothers you, I have plastic replacement screens available with approximately one eighth or one sixteenth inch square holes. These screens seem to remain reasonably flat with the smaller hole mesh usable for finch eggs.
TX-6 COMPARED TO TX-7

Now we come down to the nitty-gritty. What is available and what do all these things cost? There are two models of Turn-X incubators; one is the TX-6, the other is the TX-7. The TX-6 has a single turn potentiometer control for setting the thermostat temperature. The TX-7 has a ten-turn control, which means it turns completely around ten times for the same amount of temperature change as the TX-6 has in its single turn control. The other difference in the units is the thermometers. The TX-6 comes with 3" spirit thermometers on a card. The TX-7 comes with much more accurate 6" mercury thermometers.

WHY TX-7 INSTEAD OF TX-6

Twenty-five years ago, my wife and I obtained our first incubators. The only units we found locally were TX-6 units, then made by Marsh Farms, which we are still using. Lyon Electric Company bought the rights to Marsh products shortly after that and still produces them. I found that after a reasonable length of time in service, the single turn potentiometer (control) in the TX-6 units eventually became undependable and would not maintain temperature settings because of wear from being set in about the same position most of the time. I replaced these controls with ten turn potentiometers like the TX-7 units have and I found them much easier to adjust and probably less likely to be knocked out of adjustment by a brush of the hand against the control. I then decided that the extra $$ difference for the ten turn control unit and the much more accurate thermometers is well worth the money and I no longer keep TX-6 units in stock. I will obtain TX-6’s or any other Lyon’s product I don’t normally stock, upon request.

WHAT DO THEY COST IN 2005 DOLLARS

NOTE: I use the factory price list for Lyon’s products, but the service and modification charges are The Bird Barn's and probably will not change for a few years. The factory prices shown usually increase every year but this year they have not so far, but they still may change later in the year.

The TX-6 unit is $195. The TX-7 unit is $239. The turner for either unit is $141 when purchased with the incubator or $142 when purchased separately. This gives you a total of $380 for an unmodified TX-7. If you want the modifications, I charge $40 to set up and modify the new unit to my specifications. This includes balancing the fan and motor armature, topping off the oil wicks, renewing the Teflon tape, modifying the bottle & nut, reforming the turning ring & screen, and mounting the motor in rubber isolators and reversing its’ rotation. (I believe more efficient airflow is achieved by reversing the fan so it will draw the air up through the hole in the heater baffle plate and push it past the heater coil in a soft ring around the outside of the dome. It also avoids forcing excessive air down through the hole onto the eggs possibly drying out a piping egg.) Also a diaphram is added to block excess hot air from blowing into the motor compartment and isolators are added under the motor cover which is modified to have increased air flow to help cool the fan motor for longer service life. This brings the total of a modified unit to $279 without turner or $420 with turner.

EGG TURNING RINGS

The pheasant ring for the unit runs $19.00 and holds 27 eggs as we discussed before. The quail ring will hold up to 48 cockatiel, lovebird, and small amazon eggs and is $23.50. I recommend ordering the unit with a 72 combination ring (which is the most expensive ring $26.00 ), and then adding one additional ring. The combination ring will hold eggs from cockatiel, lovebird, or small amazon size, down to finch egg size. Buying the unit with the combination ring and adding the pheasant or quail ring, depending on the size birds you raise, will give the most flexibility at the lowest price since the dome costs the same regardless of which ring you get with it. Chicken and goose size turning rings are also available.

SO YOU GOT A MODIFIED TURN-X... THEN WHAT

The units I set up are nearly ready to go. All you need to do is put water in your bottle, set your humidity level, set your temperature, test it a few days and put your eggs in. If you bought the automatic turner (I recommend this too, it turns the eggs every hour 24 hours a day), you will have to thread two hooks into the turner and set the base on them. You may have to adjust the throw of the turning arm depending on your egg size.

SERVICING AND UPDATING

If you have used Turn-X incubators that are ready for service, I will service the unit for $30 plus parts or give you a service and motor conversion/balancing package (the same as for new units) for $55. Be sure to send the turning ring assembly and screen along with the dome if you feel adjustment is needed. Also, always send the humidity bottom so I can replace the Teflon tape in the groove the dome rides in which prevents plastic to plastic binding and the resulting damage your eggs. Include your bottle and nut only the first time you send your unit in for service and I will modify both to insure a smooth water flow into the humidity bottom. Old incubators with good plastic parts can usually be updated to the latest standards for a lot less than the cost of a new unit. Always clean the humidity bottom and the user accessible portions of the dome between clutches of eggs and before you send them to me for service so I won’t have to charge you for cleaning those areas. I always clean the internal areas of the dome during servicing. But all the dome parts and bottom can be sterilized with either a heat process or by dipping, depending on the parts, for an additional $10 if you have reason to think it is necessary.

TIPS FOR TURN-X OWNERS

Be sure the line cord plug is in a tight socket and is secure from being inadvertently unplugged.
Point the hooks on the turning motor up not down, so the base will set on the hooks. If you set the hooks down into the base, the turning motor will probably lift out of position during the turning cycle.
Keep all wires and everything else away from the turning arm. Anything blocking the turning arm will break the turning arm or damage the turning motor.
Make sure the dome rotates freely without binding or snapping during egg turning. To check this, rotate the dome by hand through the range it will be moved by the turning motor before attaching the hook. Any binding must be corrected immediately. Check that the turning ring strap is not catching on the screen (NOTE: Replacement plastic screens available from The Bird Barn will avoid this problem and lay flatter.) and make sure the Teflon tape is still in place in the groove the dome rides in. Most turning ring problems can be corrected by reforming the turning ring to be flat except that the outer segment of the spokes are slightly down which will raise the ring away from the screen and the four pins in the base that locate and prevent the screen from rotating. You may want to disassemble the strap from the ring to do this. If so, remember when reassembling, the side of the ring with the metal washer on top of the spokes should be up and the strap should have the notches up and be round and not distorted (the potato chip syndrome). Also, put the overlap of the strap to the back so it will not impede reading the thermometers, and, if this is a new unassembled turning ring, be sure to remove the protective plastic from both sides of the new strap. This may seem like a strange tip, but I would hate to tell you how many older units I have had in for service that you could hardly see through the strap because the protective plastic was still in place and had become cloudy.
Don’t let the water bottle run dry and check the temperature daily.
Develop a backup plan to try to save your eggs in case of power failure (it usually happens when you are away but you never know) or you notice your incubator is malfunctioning. In twenty years I have had five or six times when one of my seven Turn-X incubators developed a problem. Each time I was lucky and the unit was still holding the temperature close enough that I was able to save the eggs.
To verify that the solid state temperature control is working correctly, note the condition and frequency of lighting of the small neon bulb on the control board. Depending on the ambient temperature, the bulb should light (indicating power to the heat coil is on) for a few seconds and turn off for a few seconds. To see if full power is being turned on and off, observe the bulb's internal structure. Note that there are two glow bars inside the bulb that turn on (glow) at about the same time and go off at about the same time. If one of the bars never turns on or one stays on all the time or they flicker wildly instead of an even on/off cadence, the control is not functioning properly. Use your backup plan to save your eggs in case this happens and get the control serviced.
Never store your incubator or turn it off and let it set even for a day without removing all the water from it. Standing water will also evaporate in a cool incubator, and will condense on the fan motor, heat coil, and control board resulting in rusty parts that have to be replaced. When the incubator is running the metal parts are warmer than the surrounding air so moisture will not condense on them. The best way to dry out your incubator is to dump the water out of the reservoir and base, and run the incubator for a couple of days.
Save the shipping box and inserts your incubator came in. If you need to send your unit in for service, they make shipping very easy. Also they cost $4.00 to replace. When you store your incubator, put it in the shipping box. This will protect it and keep the bird dust out. Also, if possible, store it in an area with an even temperature and low humidity.
If you do decide to service your own incubator, there are some things you should be aware of. The fan motor has to be disassembled to be properly oiled. Changing the relationships of the fan parts can reverse the rotation and /or reduce the efficiency of the fan. The distance between the fan and the baffle plate also affects the efficiency of the fan. Parts on the temperature control board should not be bent over against the board and the heat coil must be reformed if it is mashed. The screws holding the motor cover on and the nuts holding the fan motor up, should only be snug, not tight. Over tightening these fasteners will cause cracking of the dome and motor cover.
LAST and MOST IMPORTANT, the fan motor is the component that requires servicing (other than cleaning the unit and filling the water bottle) more often then anything else on this incubator. If the oil wicks run out of oil or get full of dust, the bearings will wear out very quickly. To test for motor bearing problems, watch the fan when you first power up the unit after it has cooled down (below room temperature is better). If the motor starts up slowly with hesitation, the motor should be serviced. If you are shutting down the unit, again watch the fan to be sure it free wheels for a short time after you pull the plug. If it stops very quickly, the motor should be serviced. If the fan motor becomes louder than the normal 60 cycle hum and/or vibrates, the motor should be serviced.​

 

[Draconargentum]

Some of the technical stuff is gibberish to me, but from what I can tell, I seem to have found my small high-quality bator. Cool. ^_^

Thanks for your help, Elderoo. Mind if I ask you other questions when the time comes for me to be thinking more about them?