watere nipples leaking

ktm rider

Hatching
8 Years
Joined
Nov 28, 2011
Messages
7
Reaction score
0
Points
7
well, I just found the water nipples online. what a great idea. So, I showed wifey and she ordered them for me. She got them off Ebay and of course they are the chinese models. It seems that they are leaking onto my coops floor causing a wet mess. I'm not talking about them leaking around the edges, I mean they re leaking at the ends where the water is supposed to come out.

I really want to use the nipples because i already made the heated 5 gallon bucket ( two buckets and some heat tape method) and it gets super cold up here in the western Md. mountains. But this leaking business has to get resolved. I did a search here but no one has really discussed the quality issues with the various manufacturers of these nipples. To be honest they all look to be made exactly the same.

Are the chinese ones more prone to leakage or is that just something everyone lives with?
 
Oh dear, I ordered some from eBay, too - and they came from China. I haven't finished getting them ready to go yet. Sure hope they don't leak!
 
I put three on the bottom of a 5 gallon bucket and as far as I cod tell only one was leaking but it caused quite a wet area under it.
 
Be sure to tighten not only the part that goes into the drill hole, but the second part that screws into the top part. Also, before I screw them in, I use a small bead of silicone caulking around the hole and wrap the threads of the nipple with plumber's tape. Mine came from Ebay from China and I freakin' love them.
 
I put pipe dope on the threads. it is about as water tight as it can get. Hopefully it is just a bad nipple.
 
Last edited:
Quote:
Yeah, they are vertical. I put them i thebottom of the bucket.
i like the cups but with the severe cold we have I needed something that i could heat easily.
 
You can always switch to the waterer cups
They never leak
62744_beakup.jpg
 

New posts New threads Active threads

Back
Top Bottom