Well i started my coop

[Joe.G]

That is what I use rough cut, I normally use 1X10 and then add Battens.

 

[lesgo54]

i did some staining today. i put the roof on yesturday and today i build the door

 

[lesgo54]

the door is almost done, just need to add some trim boards to hide the edges of hardware cloth and stain the door

 

[lesgo54]

ill most likely get the sand tomorrow. im suppose to get my siding today so ill be busy working on the walls of the coop

 

[LilCtryGal]

I'm getting ready to get our coop constructed. Did you put electric fencing around the bottom?

 

[lesgo54]

i wanted some 1x10 but the sawmill only has 1x6.

 

[lesgo54]

That is what I use rough cut, I normally use 1X10 and then add Battens.

i wanted 1x10 but the sawmill only has 1x6

 

[lesgo54]

I'm getting ready to get our coop constructed. Did you put electric fencing around the bottom?

no, i did bury 2x4 wire just under the cinder blocks. all the way around and it sticks out about 16 inches. in the future if i have problems with critters ill get an electric fence

 

[Joe.G]

1X6 is fine depending on the look you want, My Buddy owns a decent size saw mill up the road from me, I get all of my Lumber from him, He does framing lumber as well. 1X10 is the most popular around here and is always in stock. How are you running the boards? Are you going to use battens?

 

[lesgo54]

1X6 is fine depending on the look you want, My Buddy owns a decent size saw mill up the road from me, I get all of my Lumber from him, He does framing lumber as well. 1X10 is the most popular around here and is always in stock. How are you running the boards? Are you going to use battens?

ill run the boards vertical and add batten strips after im done.