What to use to steralize the bator?

Skittlez

Songster
9 Years
Jan 29, 2010
244
3
109
Rockford
I bought a new bator. First hatch was 5/6 of my own eggs. I didn't clean it right away, but cleaned it before I used it again. Well the 2nd time around nothing hatched out of 27. I had 2 weepers, a bunch clear. I ended up with 6 at lockdown. None hatched. These were 12 shipped eggs and 15 from the neighbor down the road. I am thinking I did not clean and steralize my incubator properly as temp and humidity were spot on. My daughter opened the 6 and 1 was a quit about day 18, 1 was fully developed but teeny tiny, the other was just an eye. 2 looked like hard boiled inside, one was just a small blob.

How exactly should I steralize my incubator? It is a plastic Top Hatch. It comes apart and all pieces are plastic and washable. No styrofoam pieces. I really don't want to have this bad luck again.
 
I have a rcom king suro and I take it all apart wash in hot soapy water(not the top I only use disinfectant for that) and when dry i wipe the entire thing with disinfectant. Seems to work for me.
 
Last edited:
I had bought a styrofoam bator a few years ago. My first hatch was 100%. The next hatch was about 75%. It went down with every hatch. Finally, I did some research and bought a Gensis 1588. Its still a styrofoam, but the hatch ratio is great. I clean it with hot soapy water and let it dry in the bright sun. Sunlight will kill lots of bacteria. I also wipe it down with clorox wipes and put it in the sun again.
Sometimes it might not be the cleaning but the quality of the bator. I don't know anything about yours. I do know that sometimes its the ability of the bator to hold up after each use. Maybe someone else will help you with your bator problem. Don't give up.
smile.png
 
Thanks everybody. I will spray with bleach and water and dry in the sun. One of the reasons I bought the Top Hatch is was its washability. I will wash it better with bleach.
 

New posts New threads Active threads

Back
Top Bottom