Yellow china incubator wont stop beeping

[SeaGal4]

Im borrowing my friends incubator pictured below. It wont stop beeping!!!! First it was a humidity now it's high temp. I've literally messed with every setting possible to raise the alarm settings but it's still beeping. Sometimes it wont let me press the settings button to stop the beeping, itll just keep beeping!! Help!!!!

 

[SeaGal4]

High temp?!?

 

[Matieus27]

When it beeps what is flashing is it humidity or temp?

 

[Matieus27]

I have the same one I can walk you through setting it up

 

[SeaGal4]

I have the same one I can walk you through setting it up

Its flashing the temp. It beeps at 37.8*. How do I change high temp warning?

 

[SeaGal4]

I finally fixed the humidity alarm but I can't figure out the temp

 

[Matieus27]

Ok so hold the Settings button down for three seconds then you will want to go to the AH menu selection from there you will want to move the numbers up to your desired HIGH temp threshold. And repeat the process for your Low temp in the AL menu selection it says default is 1C but i don't know what the setting your friend you borrowed it from has it set at

 

[Matieus27]

Did you get it working correctly

 

[SeaGal4]

I messed with the AH AL settings just now. Well see how it goes!! Thank you!!

 

[Matieus27]

Your welcome and if I might add mine ran a tad high for temp it was supposed to be running at 99.5 but it was actually running at close to 102 so I would get a temp gauge with a probe that you can put inside to track temperature better