100' rolls of hardware cloth... hard time finding

[Panhandler80]

Just ordered six rolls of this here:

https://www.amazon.com/gp/product/B01N0ELHRE/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

[Panhandler80]

And just cancelled it. Didn't see where it's GAW

 

[Panhandler80]

OKAY... finally, something on order that I think will stay on order. Have three of these 100' x 48" rolls on order.

https://www.amazon.com/gp/product/B01D82U4DE/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
The only Amazon Prime GAW that I could find in 50' rolls was 23 gauge. I found 19 gauge in 50' rolls, but it was third party shipper, so who knows when it would get here. 100' rolls may be a bit more difficult to deal with, but it'll mean a little less waste at least! Hopefully it won't arrive TOO banged up.

 

[adirondak5]

And just cancelled it. Didn't see where it's GAW

Here is from Amazon's description of the MTB Hardware Cloth you posted the link for .

"PREMIUM LONG LASTING QUALITY Our heavy duty hardware cloth is made using high quality material and hot dip galvanized after welding to ensure long-term use"

 

[Panhandler80]

Here is from Amazon's description of the MTB Hardware Cloth you posted the link for .

"PREMIUM LONG LASTING QUALITY Our heavy duty hardware cloth is made using high quality material and hot dip galvanized after welding to ensure long-term use"

Doh! Oh well. Was in a hurry. Just gonna let the order of 100 foot rolls, well... Roll.

 

[Ghosty]

OKAY... finally, something on order that I think will stay on order. Have three of these 100' x 48" rolls on order.

https://www.amazon.com/gp/product/B01D82U4DE/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
The only Amazon Prime GAW that I could find in 50' rolls was 23 gauge. I found 19 gauge in 50' rolls, but it was third party shipper, so who knows when it would get here. 100' rolls may be a bit more difficult to deal with, but it'll mean a little less waste at least! Hopefully it won't arrive TOO banged up.

I would think the 19g would be the better choice. Are you using this for a run?

 

[aart]

I would think the 19g would be the better choice.

They did find and order 19ga.

 

[Ghosty]

They did find and order 19ga.

Oh, ok, thanks aart. I misread the post. I see now the 23g was 50' and op purchased 100' of 19g.

 

[Fillymj]

I ordered 16 gauge - 1/2 inch. Very strong but still not to hard to cut.

 

[Ghosty]

I ordered 16 gauge - 1/2 inch. Very strong but still not to hard to cut.

Ya, very nice, but expensive. I ordered some of that in GAW for my wire floor brooder. You can get it by the foot from Klubertanz.