3-D printing

[Nifty-Chicken]

You can see my first print here:
https://www.printerknowledge.com/th...-trigger-on-a-bambu-lab-h2s.17152/post-146821

Since then, I've printed a ton... but right now I'm printing a flow-test-tower to see what my max volumetric speed can be for this printer, filament, nozzle combo:

 

[azurbanclucker]

I've been struggling with cabling and loose gadgets when I'm out taking photos at night. So today I knocked up a simple bracket in tinkercad that has a knockout on the back for a tripod leg.

Straps to the leg with velcro and my intervalometer and USB battery attach with velcro. Printed them in PLA. Also used a bit of cork backing to help keep them from sliding as easily.

 

[Nifty-Chicken]

I've been struggling with cabling and loose gadgets when I'm out taking photos at night. So today I knocked up a simple bracket in tinkercad that has a knockout on the back for a tripod leg.

Straps to the leg with velcro and my intervalometer and USB battery attach with velcro. Printed them in PLA. Also used a bit of cork backing to help keep them from sliding as easily.
View attachment 4273162View attachment 4273161View attachment 4273160

Nice job!!

I LOVE functional prints that fix unique issues!

 

[Ilovemychicks08]

I dont think i said this yet. Both my printer and the co print system arrived. The Neptune 4 max printed really nicely, even just out of the box after leveling. It took a bit longer for the co print system to come. I built the system for 8 extruders. Lets say it was very hard to get the co print system to work with the Neptune, first issue was changing from fluidd to mainsail, finally figured that out, then i had tons of errors, had to find different configuration files because the ones on co print aren't all right(new extruder runout sensor). The last couple days I've finally been able to start printing. It prints pretty well(ill upload pictures once i have everything calibrated). it defiently wasn't the easiest to install, but its finally printing

 

[azurbanclucker]

Put up my first chunk of multiboard to hold my most common 3D printing tools. 4x 8x8 grid panels here. Dedicated bin for the deburring tool, a caliper holder, file holder, marker bin, side-cutter holder (or scissors, one of those printing now to go next to it). Still have a small shelf and a couple more baskets to put on there for little miscellany.

I ran it all in 2 colors of the PLA Hobby Lobby is selling as a test. Actually impressed with it so far. Not sure who their white label is, but I *think* it's tcbears (AKA Sunlu). Based on my experience with sunlu, kinda tracks.

Anyway, decent stuff if you need something local "right now".