Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That is a great idea!
If it is holding perfect temp then don't mess with it. If it ain't broke don't fix it.ok.....so this wont affect their growing......correct? I don't want problems with their growth bc my humidity was too low for the first few days!
if my temp is fine on both thermometers I have, I shouldn't touch it right? its perfect.....its been perfect since I put the eggs in.
I don't have an actual egg candler but what are some homeade ways I can make one? and it has to hold smaller eggs too
Get the brightest led flashlight(The ones that use three AAA batteries) and cut a small length of PVC pipe. Tape the flashlight to one end and then use the other end to candle the egg.
I made one but I went over board like I do when building anything. I made a 11in x 11in box put a light kit in there then put a strong led flood light where all the leds are close together. On top of that I put a pvc flange then put a hole in the top board and have the flange sitting in that. Then over top of that I have part of a black rubber phone case and cut a hole in it so no mater the egg size I can candle and it's not hitting anything hard. I also mounted it to my wall about 1foot above my table so I could just hold the egg big end up and have the light shine through the air bubble. For me easier to see movement that way. gonna load ya up with pics I love my home made thing lol.I don't have an actual egg candler but what are some homeade ways I can make one? and it has to hold smaller eggs too
Lmao if only they wouldn't loose it within the 21 days I would want to use it.SureFire flashlight.. $$$, but if you bought if for the husband (or wife) for Christmas and just borrow if for candling, win win!
I set my eggs last night at 9:15. The genesis is loaded with 4 lavender orphingtons, 5 Wheaten marans, 4 lavender ameracaunas, 3 delawares, 3 leg horns, 6 silkies, 2 welsummers, and two others.
very nice!I made one but I went over board like I do when building anything. I made a 11in x 11in box put a light kit in there then put a strong led flood light where all the leds are close together. On top of that I put a pvc flange then put a hole in the top board and have the flange sitting in that. Then over top of that I have part of a black rubber phone case and cut a hole in it so no mater the egg size I can candle and it's not hitting anything hard. I also mounted it to my wall about 1foot above my table so I could just hold the egg big end up and have the light shine through the air bubble. For me easier to see movement that way. gonna load ya up with pics I love my home made thing lol.
some quick pros and cons though.
pros
1 can build cheap and bulb lasts no batteries needed.
2 Can put any type/lumens of bulb in there just have to watch temp. it's why I went led and I think its rated at 1200 lumens. Too hot a bulb could cook an egg.
3 Using my wall mount I can move eggs from bator to under it fast with minimum time out of bator since I have both hands free.
4 Cost is fairly cheap think 9 for bulb 4 for light kit can get wood from 51cent parts wood at home depot or buy a cheap board correct size or use plywood laying around.
5 Hard as heck to loose it!!! Yes this is a problem for my family and flash lights. I bought a 70 dollar defender light that was like 900 lumens I think, and it's no where to be found. I wanted to make sure I could see those maran eggs lol.
6 using a rubber covering if I press slightly on it it will block all light none going around sides blinding me or drowning out the light from inside the egg.
Cons.
1 Have to build it lol
2 Cant move unless its demounted from wall but even then it's big and bulky. I was planning on setting it up right but I like looking through air cell best can see internal peeps easier and movement later stages.
3 I didn't get a kit that has a switch in cord so on and off is plug being put in. Which aint a problem if your not using a hot bulb.
This is using my golden cuckoo maran egg fist time I've tried it on a maran egg, and I cant wait to test on the ones I'm hatching.
The cell phone case hole compared to egg. under the case is 1 1/2 inch hole I think it is.
If I remember right a 1 3/4 to 1 1/2 then a coupler to go from straight pipe to threaded I was going to have it threaded through the wood but desided I didn't want it poping out. So threads of pipe sit within the wood.
Top of box threaded end in the wood.
![]()
![]()
I have added you to the list!
very nice!
Careful MsLadyHawke, you may not have enough information to make that decision wisely....... I may have an unfair advantage..........![]()
Ron, warn her before she gets into trouble.![]()
He could cook for me, I'm adventurous!
Ladies, I guess we'd better cool it, Mrs. Canoe might read all this and make him stay away! (Or we may ruin him with all the attention......)