- Thread starter
- #31
Materials list:
10x16 coop floor:
2- 4x6-16' Wolmanized skids
2-2x6-16' Const. grade SPF
9-2x6-10' " " " " " cut these to 9'9"
5-3/4"x 4 x 8 o.s.b.
5lb. 8 c.c. sinker nail
Walls:
10 lbs. 16 c.c. sinker nail
8-2x4-16 (plates)
6-2x4-10 (plates)
26-2x4-14 (studs) I cut these to 7'
2-2x6-12 window header this will be detemined by your window width
2-2x8-16 doubled up for carrier
4-2x4-8 cut to 30" for short wall above carrier
5-2x6-12 cut in half for short roof rafters
9-2x6 10 for longer rafters
2-2x6-16 eave facia
2-2x6-12 short rafter facia.....(cut in half)
4-2x6-10 long rafter facia
Roof:
7 sheets of 4 x 8 roof sheething in your choice of thickness (recommend no les than 7/16)
Wall sheething:
15- 7/16 x 4 x 8 osb (or similar)
Shingles:
80 L.F. white drip edge
7 bundles (2 1/3 sq.) shingles
1 roll 15# felt
8 lb. 1 1/4" Galvanized roofing nails
Vinyl Siding:
4 square D/4 vinyl
4 Outside corners
4 sticks Utility trim 12'
10 stick J channel 12'
8 lbs. 1 1/2" galvanized roof nails
Soffit and facia:
4 sticks F channel 12'
6 - 6" x 12' white aluminum facia
Misc. vent/solid soffit
Materials used up to this time of project. I will add as I continue.
10x16 coop floor:
2- 4x6-16' Wolmanized skids
2-2x6-16' Const. grade SPF
9-2x6-10' " " " " " cut these to 9'9"
5-3/4"x 4 x 8 o.s.b.
5lb. 8 c.c. sinker nail
Walls:
10 lbs. 16 c.c. sinker nail
8-2x4-16 (plates)
6-2x4-10 (plates)
26-2x4-14 (studs) I cut these to 7'
2-2x6-12 window header this will be detemined by your window width
2-2x8-16 doubled up for carrier
4-2x4-8 cut to 30" for short wall above carrier
5-2x6-12 cut in half for short roof rafters
9-2x6 10 for longer rafters
2-2x6-16 eave facia
2-2x6-12 short rafter facia.....(cut in half)
4-2x6-10 long rafter facia
Roof:
7 sheets of 4 x 8 roof sheething in your choice of thickness (recommend no les than 7/16)
Wall sheething:
15- 7/16 x 4 x 8 osb (or similar)
Shingles:
80 L.F. white drip edge
7 bundles (2 1/3 sq.) shingles
1 roll 15# felt
8 lb. 1 1/4" Galvanized roofing nails
Vinyl Siding:
4 square D/4 vinyl
4 Outside corners
4 sticks Utility trim 12'
10 stick J channel 12'
8 lbs. 1 1/2" galvanized roof nails
Soffit and facia:
4 sticks F channel 12'
6 - 6" x 12' white aluminum facia
Misc. vent/solid soffit
Materials used up to this time of project. I will add as I continue.
Last edited: