BYC Café

Yes, that seat switch is problematic sometimes.
I'm working from home (I forgot my laptop when I left this morning and wasn't about to go all the way back to the plant with it.)
I darted out on my lunch break and I unplugged and re-plugged that switch. It still isn't working. I can't "by-pass it" as the switch is activated when my fat ass is in the seat. It isn't closing the connections in the wiring harness so I don't know how it could be the switch. I'm thinking it's got to be the plug end with the bad connection to the pins of the switch (unless a pin corroded off inside the switch body 🤔). Maybe if I squeeze conductive lubricant into the contact sockets of the plug that will band aid it. Now, if only I had conductive lubricant...
 
I am leaning strongly in that direction. I'm pretty sure I'm past the warrantee period so I don't really have anything to lose.
Not it! But at least now I can lean off the seat when needed without the engine dying.

According to a troubleshooting article I read, there is likely a short or improper ground somewhere in the wiring harness sending a false signal to the safety interlock system. That should be great fun trying to find it.
 

New posts New threads Active threads

Back
Top Bottom