Too hot, or way too long and the skin will tear when you pluck. Also, too hot and you'll end up with rubbery skin (ick). I use an insta-read thermomether. Go for 140-150, but I try to hit as close to 145 as possible. Use the feet/legs for your handle. Dip the birds a combination of up/down and swish side to side like an old agitator washing machine. I forgot, put a couple of drops of liquid dishsoap into the water. It helps to get the water to penetrate the feathers.Yep, as long as you scald them properly, plucking is a breeze. You just have to get the wet feathers to not stick to your hands.
When you think it is long enough, try pulling out a feather from the wing or tail. They should slide right out with no resistance. If there is any pull to them, dip the bird a bit longer and try again. When you start plucking, pull out all the tail and wing feather first before they set back up, then just pluck whereever is easiest for you. You can always redip if you need to, but I've never needed to do that as long as I didn't rush the original scald too quickly.
Oh, and if you don't have a thermometer, heat your water until it just starts to form little bubbles on the pan, just before the point of simmer. You should be able to put your fingers into the water. Hot enough so you don't want to leave them there, but not so hot as to burn you.
Deb
